Assessments - 3, GPA: 3.7
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Twist off and discard the orange protective cap. NOTE: To avoid spilling ink, never press on the sides of an ink tank. Insert the ink tank into the correct slot. (Refer to the color guide on the printhead.) Press down gently until the ink tank locks into place. Insert the remaining three ink tanks into their assigned slots. Close the front cover and attach the paper rest and output tray. Electrical contacts Gently slide the printhead into the holder. The printhead will rest at a slight angle. Do not press it down. Remove the printhead from its package. Turn the printhead over, then remove the orange protective cap. NOTE: Do not touch the electrical contacts. Lower the lock lever and gently press it down until it locks into place. Raise the gray lock lever. Plug the power cord into the back of the printer and connect the other end to a power outlet. Open the front cover. The printhead holder automatically moves to the center. Remove the protective tape. Write down the serial number located to the right of the printhead. You will need this later to register the product. Remove the shipping tape from the front and sides of the printer. Ink Tanks BCI-3eC Cyan BCI-3eM Magenta BCI-3eBK Black BCI-3eY Yellow POWER Lamp POWER Button Shipping Tape Serial number Protective tape (IEEE 1284 compliant) Parallel Cable For USB Cables: For Parallel Cables: Parallel Port Secure Wire Clips Parallel Cable USB Port USB Cable Continue with Step 6 on side two. Turn the printer off. Connect one end of the USB cable to the computer, the other to the printer. Turn the printer off. Connect one end of the parallel cable to the computer, the other to the printer. IMPORTANT: Be sure printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. IMPORTANT: Be sure printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. Carefully remove all items from the box. Power Cord S750 Series Color Bubble Jet Printer Documentation and Software Kit S750 BJ (Bubble Jet) Printhead Paper Rest Output Tray Press the POWER button. Protective cap 1 2 3 4 1 5 4 3 1 2 1 2 3 4 5 1 2 2 1 6 Install the Printer Driver (Macintosh®) Install the Printer Driver (Macintosh®)6 1 Guide” CD-ROM. operating system used. TURN THE PRINTER ON so the printer port (connection) can be automatically detected. The software will begin identifying the printer port being used. IMPORTANT: If your computer cannot detect a printer port, refer to the Troubleshooting chapter in the “S750 Quick Start Guide” for instructions. When the Terminate Installation window appears, click OK. Follow the on-screen instructions to continue with Product Registration. NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead. When the software screen appears, click Install. When the Terminate Installation window appears, click OK, then Exit. NOTE: For more information. refer to the “S750 Quick start Guide” or view the Photo Application Guide on the “Setup Software & User’s Guide” CD-ROM. To insure highest quality output, continue with Step 7 Align the Printhead. Be sure to TURN THE PRINTER OFF before continuing. NOTE: For Windows® XP, Windows 2000 or Windows NT 4.0, log on to Windows as an Administrator before continuing. IMPORTANT: If you see the Add New Hardware Wizard, click Cancel. Close any open software applications, then insert the “S750 Setup Software & User's Guide” CD-ROM. The setup program should run automatically. NOTE: If the setup program does not run, click Start, then Run, then type D:\msetup.exe, where D is your CD-ROM drive. Read the Welcome screen, then click Next. Read the License Agreement, then click Yes. When the main menu appears, click Install. NOTE: If you are prompted to restart Windows, remove the CD-ROM, then click OK. After the computer restarts, insert the CD-ROM and continue. POWER Lamp off POWER Button POWER Lamp on POWER Button 1 2 3 4 5 7 8 9 6 10 11 2 3 4 5 6 MacintoshWindows Install the Printer Driver (Windows®)6 Insert the “S750 Setup Software & User's NOTE: Screen shots may differ depending on the Open the printer driver folder on the CD-ROM, then double-click the Installer icon. Read the License Agreement and click Accept. Click Install. The printer driver will load automatically. If the message “No other applications can be running…” displays, click Continue. When the “Installation was successful” screen displays, Restart your computer. NOTE: Register your product to ensure product support. Open the printer driver folder and double-click the Product Registration icon, then follow the on-screen instructions. The serial number is located on the inside of the printer, to the right of the printhead. After the computer restarts, TURN THE PRINTER ON. Select the Apple menu, then Chooser. Click the S750 icon in the Chooser. The printer name will highli...