Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
For connecting, fix it with FG terminal on rear side properly. 8 CITIZEN CBM-290/291 User’s Manual 3.3 Opening/closing front cover (1) Applying your finger on the projection on the left side of the front panel, pull it forward when the lock is released. It opens by about 180 ° centering around the fixed axis. (2) For closing, pressing the front panel, tightly close it until click sound is heard. Also, confirm, on closing, that paper is free of slack. 9 CITIZEN CBM-290/291 User’s Manual 3.4 Paper feeding With the LF switch pressed once, paper is fed by one line. Paper is fed while it is continuously pressed. Do not pull paper forcibly to feed paper. Use the LF switch. While the front cover is open or printer mechanism is pulled down, paper can be fed. But, do not do this often. This may cause a paper jam, etc. 3.5 Auto paper loading function This printer equips a function to feed the paper automatically when a new paper for replacement is inserted into paper inlet of printer mechanism. This printer feeds paper automatically when the printer detects the paper in paper inlet. 3.6 Setting roll paper 1. Open the front cover. 2. Cut the edge of paper at a right or bent angle as the following drawing. Insert the edge of paper into the paper inlet of the printer mechanism. When paper is inserted into paper inlet in printer mechanism, paper is loaded automatically. 3. Make sure paper winding direction. 4. After setting paper, set roll paper inside of main unit. 5. Eliminating slack on the printing paper and close the front panel. 6. Feed paper by pressing Feed switch, if necessary. . Factory setting is Head up position. Make sure to pull head up lever forward to pull down printer mechanism, Because auto paper feed can not be carried out at had up condition. . When any print data is remaining us print buffer, printer stars printing automatically after loading paper. 10 CITIZEN CBM-290/291 User’s Manual Make sure to pay attention to the followings. 1. In case that the paper is bent or the paper is not fed properly, set print head at head up condition and remove the paper carefully by turning paper feed knob. 2. For replacing roll paper, set print head at head up condition, and remove the paper which remains in printer unit carefully by turning paper feed knob. 11 CITIZEN CBM-290/291 User’s Manual 3.7 Removing paper jam and canceling cutter lock Remove paper jam or cancel cutter lock by following the procedure explained below. (1) Open front cover (2) Put mechanism lock lever inside of main body, pull down printer mechanism. When paper remains inside of printer, remove this paper. (3) Removing paper jam Remove paper jam manually with care. To pull out the paper from printer mechanism, pull it out carefully at head up condition. (4) Canceling cutter lock Remove paper inside of paper cutter and turn ON power. In case cutter blades to home position and carries out initializing, cutter lock was cleared completely. In case cutter does not return to home position or occurs some error again, turn OFF power, turn the knob which locates on left bottom side of auto cutter to the front side as shown in the below, then return cutter blade manually and remove the paper inside of auto cutter. (5) After fixing the problem, pull down head up lever and return printer mechanism to its home position. Cautions : Since print head and motor are hot, do not carry out this action right after printing. This may cause burning from this heat. For removing the remaining paper, do not touch the surface of print head and motor. 12 CITIZEN CBM-290/291 User’s Manual 3.8 Self print function By supplying power as pushing FEED switch or send RESET signal to this printer, type of characters which is used, ROM version and DIP switch setting etc are automatically printed. For CBM-291, paper is automatically cut off after this self printing. 3.9 PE and Mechanical alarm 3.9.1 Paper end (PE) This sensor detects the existence of paper. Printer stops printing when roll paper runs out, outputs BUSY and PE signal and lights up PAPER lamp. When new roll paper is set, this signal is canceled and PAPER lamp lights off. And then, printer starts printing and becomes data waiting status. When any print data is remaining in print buffer, make sure that printer starts printing the data after new roll paper is set. 3.9.2 Mechanical alarm This printer stops printing, stops supplying motor and print head with power and outputs BUSY signal and FAULT (in Parallel interface) signal to host computer, when the motor of printer mechanism is locked, auto paper cutter is locked, or temperature of print head is getting high. In this case, turn OFF power supply and clear the problem. To make printer stand-by mode, turn ON power supply after clearing the problem. Make sure that the data which is stored in the buffer is to be cleared due to power supply is turned OFF. Absolutely, do not carry out clearing the problem during power is ON. • Auto paper cutter lock, paper jam. Turn OFF pow...
Este manual também é adequado para os modelos :Impressoras - CBM-290 (1.34 mb)