Log:
Assessments - 2, GPA: 4 ( )

Instruções de Operação Lexmark, Modelo 18L0042

Fabricante : Lexmark
Arquivo Tamanho: 31.5 kb
Arquivo Nome : LX83RC.pdf
Língua de Ensino: en
Fotos e especificações  Lexmark  18L0042
Ir para baixar



Facilidade de uso


Using the cap removal tool provided in the kit, pry the blue cap off the cartridge body. See Fig. 1. 4. Remove the scabbard from the refill dispenser of the color you wish to refill. Insert the filler tube into the corresponding color compartment through either of the two fill holes. Determine appropriate color chamber by following figure 2. Push the filler tube into the absorbent material as far as it will go. Then draw it back out about 1/4" (6.5mm). See Fig. 2 5. Tilt the bottle until the filler tube is in the fully inverted position Fig. 3. Squeeze the bottle with moderate pressure and keep pressure applied until you see ink appear at the top of the color compartment. Immediately stop squeezing the bottle. Draw filler tube most of the way out then release pressure on bottle and allow the refill bottle to suck back any excess ink. 6. Bring the bottle back to the position shown in Fig. 2 (filler tube in horizontal position) and remove the filler tube. Recap the ink bottle and save for future refills. Replace the cap on the print cartridge. Inspect the print head and wipe off any excess ink immediately to prevent possible contamination of print nozzles. 7. Reinstall the cartridge into the printer. If asked “Installing a new cartridge” or “Reinstalling a used cartridge,” choose “Installing a new cartridge.” This will reset the ink level monitor to read “Full.” Run a priming/cleaning cycle and print test following the instructions included with your printer. It may be necessary to repeat the print test several times to bring the color balance back to normal. Pry off cap with tool supplied » Yellow Fig. 3 Magenta Cyan Dispense ink , into selected Yellow color chamber Fig.4 Snap cap back in place IF YOU HAVE ANY QUESTIONS OR ENCOUNTER ANY DIFFICULTY IN USING THIS PRODUCT, PLEASE CONTACT: RE PEA T-Û-TYFE MANUFACTUR/NG CORPORA T/ON ESTABLISHED 1931 665 State Highway 23 • Wayne, NJ 07470-6892 U.S.A. • (973) 696-3330 • (800) 288-3330 Fax: (973) 694-7287 • Email: help@repeatotype.com • Lexmark is a registered trademark of Lexmark International. Compaq is a trademark of Compaq Computer Co. Xerox is a trademark of Xerox Corp. Sharp is a trademark of Sharp Electronics Corp. ©2003 Repeat-O-Type Manufacturing Corporation. LX83RC 5/03...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias