Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
Combination of original and copy paper is not correct. Select A3L for A4 K originals and A4 for A5 originals. In Border, Centre, or Centre/ Border mode, parts of the original image are not copied. You set a wide erased margin. Make the margin width narrower. You can adjust it between 2–99 mm (0.1"–3.9"). See p.96 “Erase Border Width”and p.96 “Erase Centre Width”. Originals are not scanned correctly. Place the originals correctly. In Margin Adjustment mode, parts of the original image are not copied. You set a wide erased margin. Set a narrower margin with User Tools. You can set the width between 0–30 mm (0"–1.2"). See p.95 “Front Margin: Left/Right”, p.95 “Front Margin: Top/Bottom”, p.95 “Back Margin: Left/Right”, and p.95 “Back Margin: Top/Bottom”. There is a lack of margin space on the opposite side of the binding position. In Image Repeat mode, the original image is not copied repeatedly. You selected copy paper the same size as the originals, or you did not select the proper reproduction ratio. Select copy paper larger than the originals. Select the proper reproduction ratio. . Stamp Problem Causes Solutions The stamp position is wrong. The paper orientation is wrong. Check the paper orientation and stamp position. Troubleshooting . Combine Problem Causes Solutions You cannot make a book from Booklet or Magazine mode by folding copies. You selected a setting (“Open to left”or “Open to right”) that does not match the orientation of originals. Change the setting. When using Combine, parts of the image are not copied. You specified a reproduction ratio that does not match the sizes of your originals and copy paper. When you specify a reproduction ratio using Manual Paper Select mode, make sure that the ratio matches your originals and the copy paper. Note . Select the correct reproduction ratio before using Combine mode. Copies are not in correct order. You placed the originals in the incorrect order. When placing a stack of originals in the ADF, the last page should be on the bottom. If you place an original on the exposure glass, start with the first page to be copied. . Duplex Problem Causes Solutions When using Duplex, copy is made Top/Bottom even though Left/Right is selected. You placed the originals in the wrong orientation. Place the originals in the correct orientation. See p.10 “Original Orientation” . Copies are not in correct order. You placed the originals in the incorrect order. When placing a stack of originals in the ADF, the last page should be on the bottom. If you place an original on the exposure glass, start with the first page to be copied. If You Cannot Make Copies As You Want When Memory Is Full Note . If you set [Memory Full Auto Scan Restart] in User Tools (see p.101 “Memory Full Auto Scan Restart” ) to [Yes], even if the memory becomes full, the memory overflow message will not be displayed. The machine will make copies of the scanned originals first, then automatically proceed scanning and copying the remaining originals. In this case, the resulting sorted pages will not be sequential. Messages Causes Solutions Memory is full.* originals have been scanned. Press [Print] to copy scanned originals. Do not remove remaining originals. Note . Copying will stop and this message will be displayed when the memory is full. The scanned original exceeds the number of pages that can be stored in memory. Press [Print] to copy scanned originals and cancel the scanning data. Press [Clear] to cancel the scanning data and not copy. Press [Resume] to scan and copy remaining originals. [Stop] [Resume] The machine checks if the remaining originals should be copied, after the scanned original has been printed. To continue copying, remove all copies, and then press [Resume]. To stop copying, press [Stop]. Troubleshooting 3 82 4. User Tools (Copier/DocumentServer Features) User Tools Menu (Copier/Document Server Features) User Tools Item Names Default General Features 1/4 (See p.90 “General Features 1/4”.) Auto Paper Select Priority ON Auto Tray Switching With image rotation Paper Display Display Original Type Priority Text Original Type Display Display Auto Image Density Priority Text: On Text/Photo: On Photo: Off Pale: On Generation Copy: On Copy Quality Text: Normal Text/Photo: Normal Photo: Print Photo Pale: Normal Generation Copy: Normal Image Density Text: Normal Text/Photo: Normal Photo: Normal Pale: Normal Generation Copy: Normal General Features 2/4 (See p.92 “General Features2/4”.) Duplex Mode Priority 1 Sided>1 Sided (metric) 1 Sided>2 Sided (inch) Copy Orientation in Duplex Mode Top to Top Original Orientation in Duplex Mode Top to Top Change Initial Mode Standard Max. Copy Quantity 999 Sheets Tone: Original remains ON Job End Call ON User Tools (Copier/Document Server Features) User Tools Item Names Default General Features 3/4 (See p.93 “General Features 3/4”.) Copy Function Key: F1–F5 • F1: 1 Sided>2 Sided: T to T • F2: 2 Sided: T to T>2 Sided: T to T • F3: 1 Sided>1 Sided Combine • F4...
Este manual também é adequado para os modelos :Impressoras - 4045e (1.91 mb)