![](/images/empty_star.gif)
![](/images/empty_star.gif)
![](/images/empty_star.gif)
![](/images/empty_star.gif)
![](/images/empty_star.gif)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Laser Printer
3 Unlock the length guide, squeeze the length guide tab inward
• For single-sided printing, load the paper print side
as shown, and slide the guide to the correct position for the
facedown with the leading edge of the paper toward the
paper size being loaded.
front of the tray.
Note: For print jobs using an optional StapleSmartTM II
Quick Reference
Finisher, place the leading edge of the paper toward the
back of the tray.
• For two-sided or duplex printing, load the paper faceup
with the leading edge of the paper toward the back of the
Loading paper and
tray.
Note: For print jobs using an optional StapleSmart II
specialty media
Finisher, place the leading edge of the paper toward the
front of the tray.
Note: Notice the maximum fill line on the side of the tray
Loading the 250-sheet or
which indicates the maximum height for loading paper. Do
not overload the tray.
550-sheet tray
1 Pull the tray out.
Note: Do not remove trays while a job prints or while Busy
appears on the display. Doing so may cause a jam.
Notes:
2 Squeeze the width guide tab inward as shown, and move the
width guide to the correct position for the paper size being
• Use the size indicators on the bottom of the tray to help
loaded.
position the guides.
• For standard paper sizes, lock the length guide.
4 Flex the sheets back and forth to loosen them, and then fan
them. Do not fold or crease the paper. Straighten the edges on
6
a level surface.
If necessary, adjust the paper guides to lightly touch the sides
of the stack, and lock the length guide for the paper sizes
indicated on the tray.
7 Insert the tray.
8 If a different type of paper was loaded than the type previously
loaded in the tray, then change the Paper Type setting for the
tray from the printer control panel.
5 Load the paper.
1
...