Log:
Downloads : 6   Arquivo Tamanho: 680 kb   Fabricante : GBC  
Categoria : Impressoras
@name

3. Using a 7/32" hex wrench, remove the pull roll height adjust crank from the drive side of the machine. 4. Using a 1/8" hex wrench, remove the screws securing the cabinet panel to the drive side of the machine. 5. Inspect all the bolts and tighten any that were loosened during shipping. 6. Set the nip. (See Maintenance for the procedure.) 7. Replace both cabinet covers. 8. Replace the pull roll height adjust crank. screws holding the rear table under the pull rolls. Collect the screws and spac





categorias