Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
• Do not use the appliance with wet hands, on moist floor or when the ambience is humid. • Do not hold the mains plug with wet or moist hands. • Check the mains plug and mains adapter regularly for damages. In case of damages, have the power cord and mains plug changed by the manufacturer, or a qualified expert, in order to avoid danger. • Do not operate the appliance, if power cable or the mains plug shows damage or the unit falls to the floor or has been damaged otherwise. In such cases, bring the unit to the workshop for checking and repairs, if necessary. • Do not ever try to repair the unit yourselves. There is danger from electrical shock! • Do not let the power cord hang over sharp edges and keep it away from hot objects and open flames. Pull the plug itself to remove it from the plug socket. • Installation of a spike protector will offer additional protection with a nominal trigger current of not more 5 GB than 30 mA Please installing electrician • The cable as well extension cable required risk of anyone pulling it inadvertently or tripping over it. • If a long extension cable is used, be suitable for the power supply in question. Otherwise it causes overheating of the cable and/ • Set the unit on a rigid, flat and heat-proof surface, not near open flames (such it out of reach of children. • This appliance is suitable neither commercial use nor for use outdoors. • Children cannot sense the dangers caused by improper handling of electrical devices. • Do not, therefore, let children use household devices, under supervision. • Pull out the plug out of the socket, when the appliance is not in use and also cleaning. • Caution! The appliance is on power so long as to the power circuit. • Switch off the unit before pulling out the mains plug. • Use only spare parts from the manufacturer or his local dealer. • Never carry the unit by its power cord. • Do not remove individual housing components. SPECIAL SAFETY ADVICE • Danger of fire! Parts of the appliance will become hot during operation; therefore do not move the appliance while operating. • Do not leave the appliance unattended when it is turned on. • The appliance may only be used for chocolate. • During operation, the power cable may not come in contact with hot parts of the appliance. BEFORE INITIAL USAGE • Remove all packaging material. • Clean and dry the appliance as described under Cleaning and Care. USAGE Preparation • Place the appliance on an even surface. • The chocolate fountain must remain horizontal, to ensure a nice flow of chocolate. To balance the eventual unevenness, the stand (9) can be unscrewed. • Place the fountain cap (1) on the bowl in such a way that the three pivots (4) fit into the corresponding holes (2). • Place the transport spindle from above through the opening of the fountain cap (1), so that the motor wave (5) reaches the transport spindle. • Connect the power plug to an outlet. To warm up the appliance (about 3-5 minutes), turn the turn switch 0/I/II (7) to position I. The control light (8) will light up. Preparation of chocolate • Any kind of chocolate can be used. However, it is easiest to use baking chocolate or melting chocolate. In the case that normal bar-chocolate is used, oil (e.g. sunflower oil) must be added to achieve the appropriate viscosity of the chocolate. • Break the chocolate which will be used, about 500 g, into small pieces, and melt it in a designated container in the microwave or on stovetop. Next, add oil so that the appropriate viscosity is reached. The chocolate should flow easily from a spoon. As a point of reference, about ? cup of oil is needed for 3 cups of chocolate. • During preparation, stir the chocolate for 30 seconds, until it is completely liquidities. GB Add more oil Usage • As soon as the chocolate fountain is warmed up and the chocolate mixture is ready, turn the switch 0/I/II (7) to position II. The motor is now turned on and the transport spindle will begin to spin. The chocolate fountain will keep the chocolate warm and flowing. • Slowly pour the prepared chocolate into the bowl (10). As soon as there is enough chocolate in the bowl, it will be transported above by the transport spindle (3) and it will flow slowly under the fountain cap (1). • If the chocolate only flows on one side, the chocolate fountain will stand unevenly. Turn the stand (9) to balance the unevenness. • Now fruit, etc. can be place on a stick (or can also be held with the hand) and can flowing chocolate. • No cool or cold fluids may be added, through which the chocolate flow will be impeded. • After usage, turn the switch 0/I/II (7) to position 0 and pull out the power plug (6). CLEANING AND CARE • In addition, also pay attention to the Safety Advice. • Before cleaning, turn the appliance off, pull out the power plug (6), and allow the appliance to cool down. • Never submerse the motor base in fluid. • Detach the transport spindle (3) and the fountain cap (1). • Clean the motor base with a moist cloth or s...