Assessments - 3, GPA: 3
(
)
)
|
Facilidade de uso
It is suggested that you keep these instructions in a safe place for future reference. 2. Your voltage must correspond to the voltage printed on the bottom of the appliance. 3. To protect against electrical shock, do not immerse the unit, cord or plug in water or other liquid. 4. Close supervision is necessary when the appliance is used by or near children. 5. Unplug appliance from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning the appliance. 6. Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to EURO-PRO Operation LLC for examination, repair or mechanical adjustment. See warranty. 7. The use of accessory attachments not recommended by the manufacturer may cause fire, electric shock or injury to persons. 8. Do not let cord hang over the edge of the table or counter or touch hot surfaces. 9. Do not place on or near a hot gas or electric burner or in a heated oven. 10. To disconnect, push the “On/Off” button to the “Off” position. Then remove plug from the wall outlet. 11. Do not operate appliance in any way other than intended use. 12. When using this appliance, provide adequate air space above and on all sides for air circulation. On surfaces where heat may cause a problem, an insulated hot pad is recommended. 13. Do not use outdoors. 14. Never touch the exterior of the plate warmer during its operation and before it cools after switching to its “Off” position. 15. This appliance becomes hot when in use. Use caution when using to reduce the risk of injury. 16. Do not use to cook or keep food warm. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. SPECIAL SAFETY INSTRUCTIONS A short power supply cord is provided to reduce the hazards resulting from becoming entangled in or tripping over a longer cord. Longer extension cords are available and may be used if care s exercised in their use. If a long extension cord is used, (1) the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, and (2) the longer cord should be arranged so that it will not drape over the counter top of tabletop where is can be pulled by children or tripped over accidentally. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY Rev. 08/00B 1 9 1. Cover (Left & Right) 2. Removable Plate 3. Metal Housing 4. On/Off Switch 5. Indicator Light 6. Heating Element 7. Bread Warming Rack 8. Power Cord 9. Handles (Left & Right) 10. Metal Hooks Main Components TM Model BR220 Plate Warmer 120 Volt, 60 Hz 300 watts Dimensions: 12” x 10” x 3.5” 10 7 10 10 2 Weight: 5 Lbs. 1 3 6 2 4 58 9 1 6 Read all the sections of this instruction booklet and follow all the instructions carefully. Make sure to keep these instructions for future reference. Make sure that your line voltage matches the voltage of the plate warmer (120 volts). IMPORTANT: The plate warmer is made of chrome plated steel. The plate warmer has a capacity of 12 plates. The plate warmer can also be used to warm up buns, croissants, etc… using the bread warming rack (7). Before Using for the First Time Prior To First Use, Clean The Unit Thoroughly • Before using for the first time, wash the removable plate holder (#2) and bread warming rack (7) in hot, soapy water. • Rinse and dry thoroughly. • Do not immerse metal housing (#3) in water or any other liquid. • Plug cord into a 120 volt AC outlet. 3 How to Use the Plate Warmer How to Use the Plate Warmer • Place the plate warmer on a flat, sturdy surface. • Insert the plug into the 120 volt wall outlet. • Open the covers (1) to the left and right. • Turn the On/Off switch (4) to “On” position. • The indicator light (5) will turn on. Wait for a few minutes to let the unit attain operating temperature. You can now place the plates into their grooves to be warmed -Rotate 180° after 10 minutes for other side to warm up. Please note that the indicator light (5) will go off when temperature has been reached and will come on again when unit has cooled down. • When the plates are warmed, they can be removed from the plate warmer using an oven mitt. • When you are finished using the unit, turn the On/Off switch (4) to “Off” position, unplug the unit from the wall outlet. • Make sure that the plate warmer has cooled down before storing it away. NOTE: -There are twelve (12) grooves in the plate warmer into which plates with a maximum diameter of 30cm/12 in. may be placed vertically. -Bread, buns, croissants to be warmed should be placed on the bread warming rack (7). -Never cook on the plate warmer. Please Note: Some plates might be m...