Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
-If the disc is properly frozen, its contents have turned hard all over. -If the disc is not properly frozen, you hear a crunching sound when you press the bottom of the disc with your thumbs. -If a thin film of white frost has developed on the cooling disc, remove it with a wooden or plastic spatula. Do not use metal utensils for this purpose to prevent damage. EnglisH Do not rinse the frozen cooling disc, as this cause a thick film of ice to develop on the outside of the disc right away. 5 6 8 9 Place the frozen cooling disc in the bowl of the ice-cream maker (Fig. ). Insert the front edge of the motor unit into the lid. (Fig. ) Push the motor unit downwards into the lid until it locks into place (‘click’) (Fig. ). Insert the stirrer into the hole of the motor unit (‘click’) (Fig. 5). Place the lid with motor unit on the bowl in the correct position.Turn the lid clockwise until it locks into place (‘click’) (Fig. 6). Put the mains plug in the wall socket and switch on the appliance. Always switch on the appliance before you put the ingredients in the bowl.This is necessary to prevent the ingredients from freezing onto the cooling disc right away. 10 Pour the mixture of ingredients into the ice-cream maker through the filling opening in the lid. 11 Let the ice-cream maker work until the ice cream has the right consistency. The preparation time greatly depends on the type of ice-cream mixture and the temperature of the ingredients. It takes about 40 minutes to make compact ice cream and about 20 minutes to make soft ice cream. tips -Do not switch off the appliance too early. If you switch off the appliance too soon, the ingredients freeze onto the cooling disc.This makes it impossible for the stirrer to continue rotating in case the ice cream is not ready yet. -Do not let the ice-cream maker operate too long. Switch it off as soon as you see that the ice cream starts to melt at the surface or on the sides. -It is not possible to make another batch of ice cream right away, because the cooling disc must first be properly frozen again. If you want to be able to make two batches of ice cream in a row, order an extra cooling disc. after use 1 5 To remove the lid, pull the release slide towards you (1) and turn the lid anticlockwise ( ) (Fig. ). Remove the ice cream from the bowl. Pull the stirrer out of the motor unit. (Fig. 8) Press the release button and remove the motor unit from the lid (Fig. 9). Remove the cooling disc from the bowl (Fig. 10). cleaning Always disassemble the ice-cream maker and clean its parts after use. Make sure the appliance is unplugged. Clean the lid (without the motor unit!), the stirrer and the bowl in hot water with some washing-up liquid. Clean the cooling disc in lukewarm water (max. 0°C/100°F) with some washing-up liquid. These parts are not dishwasher-proof! Clean the motor unit with a damp cloth. EnglisH Never immerse the motor unit in water nor rinse it under the tap. Replacement The following accessories are available from your dealer: -Transparent lid (no. 4822 441 80844) -Stirrer (no. 4822 690 40258) -Cooling disc (no. HR2968 or no. 4822 511 90025) -Bowl (no. 4822 418 40898) Tip:An extra cooling disc (HR2968) enables you to prepare larger quantities of ice cream or two different flavours. Environment Do not throw away the appliance with the normal household waste at the end of its life, but , hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 11). guarantee & service If you need information or if you have a problem, please visit the Philips website at or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. troubleshooting If problems arise with your ice-cream maker and you cannot solve them with the information below, please contact the nearest Philips service centre or the Philips Customer Care Centre in your country. Problem Cause Solution The appliance does not start operating. The stirrer does not rotate. The cooling disc cannot be removed from the bowl. There is a connection problem. The lid has not been properly attached to the bowl. You put the mixture of ingredients in the bowl before you switched on the appliance.This has caused the ingredients to freeze onto the cooling disc. The cooling disc has frozen onto the bottom and walls of the bowl. Check if the plug is inserted in the wall socket properly. Remove the mains plug from the wall socket and reinsert it. Place the lid with motor unit on the bowl in the correct position.Turn the lid clockwise until it locks into place (‘click’). Always switch on the appliance before you put the ingredients in the bowl. Let the cooling disc defrost for a few hours until it has come loose from the bottom and walls ...