Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Table 1. Supplied Loose Parts Item No. Part No. Name Qty. 1 15209 Adapter Lid 1 2 22127 Bracket 2 3 50904 RTV 1 4 52946 52964 Cover, Gray Cover, Black 1 5 91957 Label 1 6 620042919 Baffle, Ice 1 7 70226 #10 x 3/4” Sheetmetal Screw 12 8 620701902 Acorn Nut, 8--32 Nylon 4 9 620701901 Sealing Washer 4 10 611701903 #8 Nylon Washer 4 11 15192 Lid Opening Cover (For 22–inch Wide Icemakers) 2 12 630500109 Bin Stat 1 ! WARNING: Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the user. Verify that all the power is off to the unit before performing any work. Failure to comply could result in serious injury, death or damage to the equipment. ! WARNING: All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or the equipment manufacturer’s instructions. Failure to comply could result in serious injury, death or damage to the equipment. ! WARNING: All of the attachment screws and plates must be installed as directed in this manual. Failure to comply could result in serious injury, death or damage to the equipment. ! WARNING: The dispenser must be secured with 3/8-16 bolts (6) to the counter before installing this Ice Maker Adapter Kit. Refer to the installation manual and Figure 3 for the counter mounting template. NOTE: Adjust the automatic agitation timer located in the dispenser’s electrical control box to 5 seconds on, 20 minutes off. Access to the timer is provided by removing the merchandiser/upper front panel. 1. Unpack the kit. 2. Remove the two (2) screws from each side of the dispenser cabinet and the plastic hopper covers (2) that were shipped with the unit. 3. Place the adapter lid on the unit and use the four (4) screws that were removed to fasten the lid in place. 4. Install the ice baffle on the lid assembly as shown in Figure 2. Release Date: November 4, 2010 Revision: B © 2007-2010, IMI Cornelius Inc. - 1 -Publication Number: 620204732INS ED/DF300 30” CCM330/430/530/630/830/1030 Nordic Style Lid Kit Installation Instructions IMPORTANT: The baffle prevents ice from over–filling the manual fill area during agitation/ dispensing with a full storage bin and forcing the manual fill cover off. 5. Seal the ice maker to the top of the dispenser after determining the correct location for the ice maker (see Figure 1). A. Run beads of RTV around the opening in the lid and inside of the perimeter of the ice maker outline so that the ice maker will set on the RTV. B. Set the ice maker onto the lid and position it as required. C. Wipe away the excess RTV. 6. Drill 0.136” diameter holes into the ice maker cabinet and the dispenser lid using the ice maker mounting brackets as templates. USE CAUTION SO AS NOT TO DRILL INTO ANY ICE MAKER COMPONENTS (CONDENSER, TUBING, ETC.). Secure the brackets using the #10 sheet metal screws provided. 7. Install the wire form bracket, supplied with the bin stat kit (item 4), t...
Este manual também é adequado para os modelos :Outros aparelhos de cozinha - 630 (1.08 mb)
Outros aparelhos de cozinha - 530 (1.08 mb)