Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Contact Customer Service (see warranty) to return for examination, repair or electrical or mechanical adjustment. 7. The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter or touch hot surfaces. 10. Do not touch hot surfaces. Use handles or knobs. 11. If any item drops into the Chocolate Fountain, turn control dial to"0FF"and remove the power cord from the electrical outlet before attempting to remove the item. 12. Do not place on or near a hot gas or electric burner, or in a heated oven. 13. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids. 14. To disconnect, turn control dial to "OFF", then remove plug from wall outlet. 15. Do not use appliance for other than intended use. 16. Do not operate unless Chocolate Fountain is fully assembled. Make sure the bowl, auger, tower, and canopies are properly secured before operating appliance. 17. Only use the Chocolate Fountain on a smooth level surface. SAVE THESE INSTRUCTIONS THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY. No user-serviceable parts inside. Power unit never needs lubrication. Do not attempt to service this product. 2 POLARIZED PLUG This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. If the plug fits loosely into the AC outlet, or if the AC outlet feels warm, do not use that outlet. AUTO SAFETY SHUT OFF This Chocolate Fountain is equipped with an auto safety shutoff. Should the motor become overheated, it will turn off. In order to restart the Chocolate Fountain, follow the steps below. 1. Turn the control dial to OFF and unplug the Chocolate Fountain. 2. Remove the chocolate mixture from the bowl and place the mixture into a microwave safe container. 3. Wait at least 20 minutes for the motor to cool. 4. Reheat the chocolate mixture in the microwave and add it back into the bowl. 5. Plug in and operate normally. Thank yOU for purchasing theOSTER™Chocolate Fountain. Before you use this product for the first time, please take a few moments to read these instructions and keep it for reference. Pay particular attention to the Safety Instructions provided. Please review the product service and warranty statements. To learn more about Oster® products, please visit us at or call us at 1 -800-334-0759. 3 LEARNING ABOUTYOUR CHOCOLATE FOUNTAIN Q Drip Tray Tower © Bowl © Cap © Control Knob © Small Canopy © Base © Large Canopy © Auger © Guard 2 ) HOWTO \J Preparing your Chocolate Fountain Wash all parts according to the CLEANING YOUR CHOCOLATE FOUNTAIN section in this manual. Assembly 1 Insert the BOWL into the BASE and turn clockwise to lock into place. 2 Insert the AUGER into the BOWL. 3 Cover the AUGER with theTOWER. 4 Rotate theTOWER until it snaps twice and locks into position in the BOWL. 5 Slide the GUARD down to the bottom of theTOWER. 6 Slide the LARGE CANOPY then the SMALL CANOPY down the TOWER. 7 Place the CAP onto the top of theTOWER and align the tab on the CAP with the groove in the top of theTOWER. 8 The DRIP TRAY comes in two sections, assemble the DRIP TRAY by inserting the tabs into the opposite opening and snap the two halves together. Slide the DRIP TRAY over theTOWER and CANOPIES and rest it on the edge of the BOWL. NOTE: Notches in DRIP TRAY should be facing upwards so skewers can rest easily. NOTE: All parts must be securely in place for the Chocolate Fountain to properly operate. If the unit does not sit level, rotate the adjustable foot on the bottom of the BASE until the unit is stable. Operating Your Chocolate Fountain Operation with a Warm Mixture Prepare the melted chocolate according to the instructions below: 1 Preheat the Oster™ Chocolate Fountain for 3-5 minutes by plugging the cord into a standard outlet and turning the CONTROL KNOB to the HEATER setting. IMPORTANT: DO NOT turn the CONTROL KNOB to HEATER/MOTOR until the melted chocolate has been added to the BOWL. Operating the Chocolate Fountain dry may cause damage to the unit. 2 Add the melted chocolate to the BOWL and turn the CONTROL KNOB to HEATER/MOTOR. Chocolate will start flowing up through theTOWER and over the canopies to create a waterfall. NOTE:The Chocolate Fountain must be on a level surface to flow properly. Operation with a Cool Mixture 1 Prepare the dressing or dip. 2 Add your mixture to the bowl and turn the control dial to MOTOR. Your mixture will start flowing up through theTOWER and over the canopies to create a waterfall. NOTE: The Chocolate Fountain must be on a level surface to ...