Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
When installing a K00141 on a Manitowoc dispenser, remove the gray side trim pieces on the top sides of the dispenser. B. Place support angle on bin or dispenser, as shown, prior to adapter installation. Locate foam tape from kit in the (A) positions on top of bin, as shown. Note locations of narrow and wide tape. C. Place adapters on bin or dispenser, as shown. Make sure the two holes from the support angle and adapters are aligned on the side. D. Using the adapters as templates, drill three 5/32” (4 mm.) holes, .500” (12.7 mm.) deep maximum, in bin or dispenser. Warning: Do not drill through interior liner. Attach with 10-24 x .500” screws provided. E. Apply foam tape to the edge of the adapters and on the front and back of the bin or dispenser between the adapters in the (B) positions. Note: It is recommended to RTV intersections and along front inside edge of foam tape (see drawing) to prevent water tracking. 3. Refer to ice machine installation manual for ice machine installation procedures. Installer: It is Recommend RTV Intersections and Al Front Inside Edge of Foam to Prevent Water Track Support Angle (B) Wide Foam Tape (from Kit) (A) Locate Narrow Foam Tape Retween Rin and Ada] (A) (A) Wide Foam Tape, Two Places, Approx. 2' (A) (B) Wide Foam Tape Manitowoc Ice, Inc. 2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8011123 Rev. 05/12/04 Web Site - www.manitowocice.com...