Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
Remove three screws connecting the water pump housing to the pump motor. Rotate the pump housing clockwise (from the shaft end) one position and then reinstall the screws and mounting bracket (see Figure 3). 2. Remove the water inlet fitting from the water inlet bracket. Save two of the three plastic wing nuts and water inlet fitting. These will be reused. Discard the bracket. Install in the following order: 1. New ice deflector 2. New water trough 3. Water pump and reroute water pump supply hose and dump to right side of pump (see Figures 1 and 3) 4. Plug for water level probe and old mounting screw to cover holes - Note! Do not install probe at this time 5. New water curtains 6. New water inlet/water level probe mounting bracket, using screws provided (see Figure 2) 7. Water inlet fitting and water level probe using existing plastic wing nuts - route water inlet probe through grommet in bulkhead with ice thickness probe wire 8. 1-1/2” bushing in water inlet bracket 9. Water inlet hose through bushing on back of bracket to water inlet fitting 10. New control board 11. Trough protectors Manitowoc Ice, Inc. 2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 8006823 Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Sheet 1 of 3 Web Site - 03/25/02 Q-DUAL INSTALL DATA Figure 1 8006823 Sheet 2 of 3 03/25/02 WATER INLET BRACKET Figure 2 WATER PUMP SUPPLY POSITION AFTER ROTATING PUMP HOUSING Figure 3 (Top View) 8006823 Sheet 3 of 3 03/25/02...
Este manual também é adequado para os modelos :Outros aparelhos de cozinha - F-STYLE OR NON MANITOWOC BIN 7601223 (130.19 kb)