Assessments - , GPA: ( )

Instruções de Operação Black & Decker, Modelo JKC920

Fabricante : Black & Decker
Arquivo Tamanho: 1.29 mb
Arquivo Nome :

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

• Do not overfill the kettle - keep water level below the pour spout. • Do not open the cover while water is heating. BOILING WATER 1. Press lid release latch to open cover of kettle (D). 2. Be sure kettle has at least 3. cups of cold tap water in it before use. 3. Close lid on kettle securely. (Cover snaps into place.) 4. Place kettle on the power base so the element on the bottom of the kettle rests securely on the power base (E). 5. Position kettle with spout facing away from walls, cabinets and your body. C D 4 E 6. Plug the kettle into a standard electrical outlet. The power light at the base of the kettle under the handle comes on (F). 7. Press the I/O (On/Off) switch button to the I position (there will be a click) and the water begins to heat (G). 8. When water boils the kettle will automatically shut off and the indicator light will go out. Do not try to hold the switch in the ‘On’ position once the water has boiled. 9. To re-boil water, it is necessary to wait several minutes for water to cool. 10. To reuse the kettle, allow it to cool down. Before pressing the I/O (On/Off) switch check that there is enough water in the kettle. Simply press the I/O (On/ Off) switch to the I position or pour off any unused water and refill. Warning: Kettle filled with boiling water is hot. Use only the stay cool handle to pick it up. When taking kettle to the table, carry kettle with caution to avoid spillage. Set it on a trivet or hot pad to protect the table surface or tablecloth. 11. Hold kettle level when pouring, especially when filled to maximum. Do not pour too fast. Note: Make sure lid is closed before pouring hot water from the kettle. 12. To remove kettle from power base simply lift up. 13. Empty and unplug the kettle when not in use. HELPFUL TIPS • Always use fresh, cold water for each boiling process. • Do not store water in the kettle. This helps to prevent build up of mineral deposits. • For your safety, make sure cover of kettle is closed securely before pressing the I/O (ON/OFF) switch. • Always unplug the kettle before filling. • Never use less than the minimum amount of water (3 . cups). Note the MIN line on the kettle. • Never use more than the maximum amount of water (7 cups). Note the MAX line on the kettle. • The power supply is connected only to the power base. This allows for easy movement of the kettle to the table. (Remember to use a trivet or hot pad under the hot kettle.) • Do not try to hold the switch ‘On’ (I) when water has boiled. • Use your kettle to boil water for beverages, soups, cereal, noodles, rice and pasta. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Kettle is not heating. Kettle is not plugged in. Kettle is not properly placed on power base. Check to be sure appliance is plugged into a working outlet, the I/O (On/Off) button has been engaged and the kettle is securely placed on the power base. Kettle has boiled dry Kettle was accidentally turned on without water. Unplug kettle and allow to fully cool down before refilling. Kettle heats but does not boil or works intermittently. Appliance may need descaling Follow directions for descaling the kettle. The ‘On’ (I) button will not stay on. The kettle is too hot. Allow the kettle to cool down at least 5 to 10 minutes. Make sure there is enough water in the kettle. BUILT-IN SCALE PROTECTION Lime scale forms over time when water is heated. Though harmless, it may be bothersome. The concealed heating element in the kettle is designed to help reduce scale buildup. The kettle has a scale filter at the bottom of the pour spout to prevent particles from pouring into your beverage. 1.7LMAX1.5L1.0L0.7LMIN F G 5 6 Care and Cleaning This appliance contains no user-serviceable parts. Refer service to qualified service personnel. CLEANING • Before cleaning, be sure the base is unplugged and the kettle has cooled completely. Empty any remaining water from the kettle. • Pull out the scale filter for cleaning. Wash the filter in hot soapy water and rinse or place it in the utensil holder of the dishwasher. • Wash the inside of the kettle with soapy water and rinse. NEVER IMMERSE THE KETTLE IN WATER OR OTHER LIQUIDS or place in a dishwasher. • Wipe the exterior of the kettle and base with a damp cloth or sponge and dry. The concealed heating element at the bottom of the interior may discolor. This will not affect performance. Do not use abrasive soaps, cleansers, or scouring pads. • Over time, the kettle may heat up but will not boil, depending on your use and the hardness of the water in your area. When this happens, it is time for descaling. Use a scale/lime remover and follow its manufacturer’s directions. CORD STORAGE Conveniently store the cord beneath the base by wrapping it around the grooves on the base (H). H 7 INSTRUCCIONES IMPORTANTES DE SEGURIDAD Al utilizar equipos electrodomesticos, siempre se deben respetar las precauciones de seguridad basicas, incluyendo las siguientes: . Lea todas las instrucciones. . No toque las superfic...