Log:
Assessments - 2, GPA: 3.5 ( )

Instruções de Operação Fisher & Paykel, Modelo GD75IA1

Fabricante : Fisher & Paykel
Arquivo Tamanho: 1.8 mb
Arquivo Nome : 4020_Wastedisposal_UG_HIRES_02.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


For current details about model and specification availability in your country, please go to our website listed on the back cover or contact your local Fisher & Paykel dealer. Safety and warnings Use this appliance only for its intended purpose as described in this User Guide. Important safety precautions ! When using this appliance, always use basic safety precautions, including the following: Danger! This appliance is not intended for the use by children or infirmed persons without supervision. To reduce the risk of injury, close supervision is required when a waste disposer is used near children. Do not put fingers or hands into the waste disposer. Unplug the unit before attempting to clear a jam or remove an object from the disposer. As the waste disposer is magnetic, use only non-magnetic tools such as a wooden spoon or long handled plastic tongs when attempting to loosen a jam or remove objects from the waste disposer. To reduce the risk of injury by materials that may be expelled by a waste disposer, do not put non-food items, or any of the following into the food waste disposer: a) Shells, such as mussel or oyster shells. b) Caustic drain cleaners or similar products. c) Glass, china or plastic. d) Large whole bones. e) Metal, such as bottle caps, tin cans, utensils or aluminium foil. f) Hot grease or other hot liquids. g) Whole corn husks or similar fibrous material. When not operating the waste disposer, leave the drain stopper in place to reduce the risk of objects falling into the disposer. Your new appliance must be properly installed in accordance with the installation instructions before it is used. Never unplug the waste disposer by pulling on the power cord. Always grip the plug firmly and pull straight from the outlet. Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Power cords must be replaced by a qualified electrician or authorised service engineer. Do not use a cord that shows cracks or abrasion along it’s length or at either the plug or appliance end. WARNING! Electrical Shock Hazard To reduce the risk of electric shock or injury to persons, read the IMPORTANT SAFETY PRECAUTIONS before operating this appliance. SAVE THESE INSTRUCTIONS Installation instructions Before you begin Please read these installation instructions completely and carefully. The following installation instructions are intended as a general guide. Please ensure that the waste disposal unit is installed according to local building codes for your area. Installation is recommended to be done by a qualified plumber or installer. Product failure due to improper installation is not covered under the Warranty. Preparation Removing an existing waste disposer, if installed 1 Disconnect electrical power supply to existing disposer. 2 Remove old disposer or sink flange assembly. 3 Inspect drain line. If it is heavily coated with hardened grease and accumulations, clear out the build-up using a plumber’s rod or auger. 4 Remove old sealing materials and gaskets from sink opening, both top and bottom. What you will need Phillips screwdriver Flat blade screwdriver Steel Punch or wooden dowel Petroleum jelly or liquid soap Plumber’s Putty Important! Top and bottom of sink and sink flange surfaces must be free of any materials to prevent leaks. Installation instructions Unpacking your waste disposer 1 Remove the waste disposer from the packaging. 2 Identify and check that all components are included in the carton before beginning the installation (fig. 1). Take care not to misplace any of the components. 1234567 Components 1. Stopper 2. Sink flange 3. Rubber gasket 4. Flange ring 5. Protector ring 6. Mount ring 7. Screw clamp 8. Hopper with splash guard 9. Dishwasher discharge inlet 10. Drain housing 11. Reset button 12. Built in air-switch 13. Lower shell 14. End Bell (Electrical Connections) 15. Power cord 16. Outlet gasket 17. Discharge waste elbow 18. Waste elbow flange nut 810911141312 15 Fig 1. Three Bolt Mount System 16 17 18 Fig 1.2. Elbow Installation instructions Installing the waste disposer 1 Loosen the clamp screw to allow the mounting system to be removed from the unit (fig.2). 2 Turn the mounting assembly over and remove the flange ring from the track on the sink flange. Undo the three screws holding it together. This will allow the sink flange, mount ring, and protector ring to separate (fig 3). Use the flat blade screwdriver as a lever if required. 3 Apply a small amount of plumbers putty to the lip of the sink flange and position the sink flange into the sink drain hole ensuring that the rubber gasket on the underside of the sink flange is firmly in place (fig.4). 4 Approaching from under the sink, slide the protector ring and mount ring onto the underside of the sink flange. Fit the flange ring into the track on the sink flange, then tighten the 3 mounting screws evenly and securely (fig.5). Note: Ensure that the mounting assembly connection is fixed securely...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias