Assessments - 3, GPA: 3.7 ( )

Fabricante : Bunn Arquivo Tamanho: 115.38 kb Arquivo Nome : 10241.0001.pdf Língua de Ensino:

Place the server on a warming stand to keep the beverage hot at remote locations. The spill-resistant design lessens the chance of hot beverage burns and splashes. USER NOTICES The notices on this server should be kept in good condition. Replace unreadable or damaged labels. CLOSEREMOVEONLYFORDAILYCLEANINGOPEN 12373.0000 12356.0000 BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 PHONE: (217) 529-6601 FAX: (217) 529-6644 10241.0001C 5/12 ©1987 Bunn-O-Matic Corporation USING THE SERVER 1. Lock the cover in place on the server by turning it clockwise as far as it will go. 2. Locate the center of the server cover directly under the funnel dripout of a Bunn® coffee brewer when brewing directly into the server. 3. The hot beverage is available at the faucet. The sight gage displays the remaining beverage in the server. 4. As the server is emptied, more may be added. NOTE – Be careful not to overfill the server. CLEANING 1. Turn the lid assembly counterclockwise as far as it will go to remove it for daily dishwasher cleaning. NOTE – Bunn-O-Matic recommends CASCADE® dishwashing detergent for thorough cleaning. DO NOT use bleach. CASCADE® is a registered trademark of Procter & Gamble Co., Cincinnati, Ohio. 2. Remove the cap from the lid assembly by unscrewing in a counterclockwise direction. Remove the gasket from the bottom side of the lid assembly. 3. After thoroughly cleaning all parts, reassemble the lid assembly. 4. Clean all other surfaces with a damp cloth rinsed in any mild, non-abrasive, liquid detergent. 5. Clean the sight gage with a brush. 6. Thoroughly rinse the entire server after cleaning. P2495 10241.1 050712 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor. 2) All other equipment -2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures rela...

Baixe o seu

Para fazer o download, introduza 2 dígitos :