Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
Simply omit the steps which do not apply to the unit you are installing. Valve Left/Seat Right version is shown throughout this manual. Valve Right/Seat Left is opposite. Plumbing contractor shall be responsible for installing shower face plate at the correct height to meet accessibility requirements. This installation manual and parts list should be filed by the owner’s maintenance department. Installation Instructions ADA Compliant HN200 Recess-Mounted Shower with • Equa Flo™ • Accu-Zone™ Infrared Control • Thermostatic Control • Single Valve • Air Metering Valve • Touch-Time™ or • Touch Time™ w/Battery Table of Contents Pre-Installation Information . . . . . . . . . . . . 2 HN200 Components . . . . . . . . . . . . . . . . . . .3 HN200 Shower Stall Dimensions . . . . . . . .3 Installation Instructions . . . . . . . . . . . . . .4-7 Cleaning Instructions . . . . . . . . . . . . . . . . . .7 Shower Seat Repair Parts . . . . . . . . . . . . . . .8 Shower Curtain Repair Parts . . . . . . . . . . . .8 P.O. Box 309, Menomonee Falls, Wi 53052-0309 215-1189 Rev. F; EN 02-342 TEL. 1-800-BRADLEY FAX (262) 251-5817 Page 1 of 8 ADA Compliant Recess-Mounted Shower HN200 Installation Instructions Pre-Installation Information CAUTION: This shower system may not protect the user from scalding if other temperature controlling devices in the plumbing system should fail. CAUTION: Excessive heat to the Equa-Flo™ valve body will damage its internal parts. Overview The Bradley ADA compliant HN200 comes assembled for job site installation. When installed in a 36" x 36" stall, the HN200 provides a shower which meets ADA accessibility codes. Check local codes for dimensional compliance. Components Face Plate Material: The shower control panel is constructed of stainless steel. Valve and Component Material: All exposed parts (except seat cover) are stainless steel or polished chrome-plated brass. Valve bodies are brass casting. Barrier-Free Seat: Folding shower seat is constructed of molded plastic with a load capacity of 250 lbs. Shower Curtain: Vinyl shower curtain comes with stainless steel curtain rod and hooks. Supplies required for installation: • 1/2" NPT hot and cold or 1/2" NPT tempered water supplies • (12) 1/4" wall anchors and 1/4”-20 x 3/4” screws to install shower face plate assembly to wall • (6) wall anchors for 1/4-20" x 1-1/4" hex socket screws to install grab bar (grab bar is designed to sustain a concentrated load of 300 pounds) • (7) wall anchors for 1/4 x 1/2" Type AB sheet metal screws to mount shower seat HN200 Recess-Mounted Shower Warranty Bradley Corporation warrants to commercial and institutional purchasers only each unit free from defects in material and workmanship under normal use and service upon the following terms and conditions: 1. This warranty is limited to replacing or repairing, at our option, transportation charges prepaid by the purchaser, any Bradley unit or part thereof which our inspection shall show to have been defective within the limitations of this warranty. 2. The period during which HN200 Shower components are warranted is one (1) year, measured from the date of our invoice. 3. This warranty does not cover installation or any other labor charges and does not apply to any units which have been damaged by accident, abuse, improper installation or improper maintenance. 4. The replacement or repair of defective units as stated in this warranty shall constitute the sole remedy of the purchaser and the sole liability of Bradley Corporation under this warranty. Bradley Corporation shall not otherwise be liable under any circumstances for incidental, consequential or indirect damages caused by defects in the repair or replacement thereof. 5. This warranty extends only to commercial and institutional purchasers and does not extend to any others, including consumer customers of commercial and institutional purchasers. 6. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular purpose or otherwise. Bradley Corporation • 215-1189 Rev. F; EN 02-342 ADA Compliant Recess-Mounted Shower Installation Instructions HN200 HN200 Components and Shower Stall Dimensions Recessed Soap Dish Hand-Held Hose Spray with Post-Style Bracket Stainless Steel Hose Quick Disconnect Inline Backflow Preventer Showerhead Diverter Valve Shower Valve (Equa-Flo™ shown) Shower Face Plate Assembly Grab Bar (S53-184) Elbow with Flange 18" (457mm) 18" (457mm) 36" 36" 36" (914mm) 36" (914mm) 15" (381mm) 15" (381mm) 14-1/4" (362mm) max. 14-1/4" (362mm) max. 4" 4" (102mm) (102mm) (914mm) (914mm) min. min. VALVE LEFT/SEAT RIGHT VALVE RIGHT/SEAT LEFT NOTE: Compliance and conformity to local codes and ordinance is the responsibility of the installer. Bradley Corporation • 215-1189 Rev. F; EN 02-342 ADA Compliant Recess-Mounted Shower HN200 Installation Instructions Installation Instructions NOTE: Flush the supply ...