Assessments - 4, GPA: 4.8
(
)
)
|
Facilidade de uso
Tighten (3) SCREWS in the LOCK-RING to secure fitting. FOR 1340 SERIES ONLY Warning; 60 MESH STRAINER required for supply water. Install RISER TUBE (not included) and tighten SUPPLY NUT. Connect RISER TUBE to COLD or TEMPERED water supply. FOR 1340M SERIES Connect FLEXIBLE FAUCET SUPPLIES (1/2" faucet cone on one end, 3/8" compression on the other) to the MIXING VALVE INLETS and the hot/cold wall stops. The FLEXIBLE FAUCET SUPPLIES are NOT included. Turn on WALL STOPS and check for leaks. H With WALL STOPS open and water flowing, adjust MIXING VALVE to temper water. MIXING VALVE MIXING VALVE INLETS OLD vojy 2 SPRING 3 1 PAD Retaining Ring Lift off retaining ring then slide out lever horizontally. Cycle time is factory set but can be changed as shown. TO SERVICE TO remove HANDLE use a 3/32" ALLEN WRENCH to loosen three set screws in the HANDLE as shown in Figure A. Remove VALVE CARTRIDGE for cleaning or replacement, see in Figure B. VALVE TIGHTEN SET SCREWS Reassemble in reverse order, Figures C & D. HANDLE CARTRIDGE REMOVE ft 3/32" ALLEN WRENCH Figure A REPLACE TIGHTEN VALVE CARTRIDGE Figure D Figure B Figure C SPRAY INSTALLATION/REMOVAL 0 Use included key to install SPRAY into spout end. HOTLINE FOR HELP For toll-free information and answers to your questions, call: 1 (800) 442-1902 Weekdays 8:00 a.m. to 7:00 p.m. Eastern Time IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093) Product names listed herein are trademarks of American Standard Inc. © American Standard Inc. 1996 ROUGHING-IN DIMENSIONS 48mm (1-55/64) 111mm (4-3/8) 25mm (1" MAX) 53mm (2) (53/64 DIA.) 1/2"-14 NPSM THREAD H- 90mm -1 (3-9/16) All dimensions are approximate and for reference only. 012692D 6...
Este manual também é adequado para os modelos :Outros acessórios para a casa - 1340 Series (158.84 kb)