Assessments - 1, GPA: 4 ( )

Fabricante : AeroGarden Arquivo Tamanho: 924.55 kb Arquivo Nome : Língua de Ensino:

• Insert new Grow Bulbs into Lamp Hood. • Plug in AeroGarden. *Check with local recycling authorities for light bulb recycling availability in your area. Replace Grow Bulbs order replacement bulbs at or from your retailer. Push locking Button in Prepare For Your Next Garden Prepare For Your Next Garden Use only water and mild soap when cleaning your AeroGarden (except when Sanitizing -Step 7). Do not use abrasive cleaners or run through the dishwasher. ! Sanitize AeroGarden. • Fill Bowl . full with water. • Add . cup (59ml) of chlorine bleach. • Replace Grow Surface on Bowl, place Bowl on Base and plug in AeroGarden for 1-2 minutes. (Select Salad Greens on Control Panel to be sure water is flowing.) • Unplug AeroGarden and empty bleach water from Bowl. Rinse AeroGarden. • Refill Bowl with tap water and replace on Base. • Plug in and run AeroGarden for 1-2 minutes. (Select Salad Greens again.) • Empty Bowl and repeat this step (step 8) one more time. Towel dry the Bowl and Grow Surface before putting them back together and setting them back on the Base. If your Grow Bulbs have been in use more than 6 months, they should be replaced at this time. Your AeroGarden is now ready for replanting. Unplug AeroGarden. Carefully remove Bowl and Grow Surface from the Base and bring to a sink. Set Base and Lamp Hood aside. NEVER SUBMERSE BASE AND CONTROL PANEL IN WATER. Remove Grow Surface from Bowl and place on a counter near a sink. Empty contents of Bowl in sink. Remove Seed Pods and plants from Grow Surface. • Pull Seed Pods out of Grow Surface openings. • Throw away Seed Pods and plant debris (plant growth and roots). If you compost, plant debris can be composted. Rinse and clean Grow Surface, Pump Stand and Pump Filter*. • Use a soft scrub brush to clean tangled roots from underside of Grow Surface and Pump Stand. • Remove Pump Filter from Pump Stand. Gently scrub roots from Pump Filter. • Place Pump Filter back into Pump Stand. After cleaning, there may still be a few roots in your Grow Surface, Pump Stand or Pump Filter. This will not affect the operation of your AeroGarden. 1 2 3 4 5 6 9 7 8 10 11 * IMPORTANT NOTE: We recommend replacing the Pump Filter after growing two gardens. Order Pump Filters from or from your retailer. Pump Stand Pump Filter Plant Growth Seed Pod Roots Grow Surface Grow Surface Bowl Base Lamp Hood cleaning and Storage Instructions for your AeroGarden When your garden has completed its growing cycle… Prepare For Your Next Garden (continued) Prepare For Your Next Garden (continued) ! Bundle cord when furnishing is not in use. Before planting a new garden, be sure to restart the nutrient timer. • Press and hold “Reset” button until the red “Add Nutrient” light blinks 3 or 4 times (approximately 9 seconds). • Release “Reset” button. “Add Nutrient” light will turn off. • Your nutrient timer is now reset. (In some cases you may see other lights blink as well. This is nothing to worr...

Baixe o seu

Para fazer o download, introduza 2 dígitos :