ImageLink • ImageLink will not work in the following cases: – If no file is included in an MP3/WMA folder. – If Intro Scan is activated. – If the source is changed to another from “CD” or “SD.” – If more than one file are included in a folder, a file with the youngest file number is used for the graphic screen. Ejecting a disc • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to prevent it from dust. (Disc will not play this time.) Sound adjustment General • Sound adjustments cannot affect the Voice Support System (VSS: see page 29) output. VSS sound always comes out of all speakers connected. • If you are using a two-speaker system, set the fader level to “0.” • Subwoofer out setting takes effect only when a subwoofer is connected. • You cannot change the input level—Volume Adjustment—of the FM stations. If the source is FM, “Fix” will appear when you try to adjust it. Storing your own sound modes • If you do not want to store your current adjustment, but only to apply the adjustment to the current playback source, press “BACK” repeatedly to go back to the operation screen of the current source. Adjustment you made remains effective until you select a sound mode. ENGLISH To be continued.... ENGLISH Graphic displays Downloading (or deleting) files • You can download a file only while selecting “CD” or “SD” for the playback source; on the other hand, you can delete a file while selecting any source. • If you have already downloaded an animation for “OPENING,” “ENDING,” or “MOVIE,” downloading a new animation deletes the previously stored animation. • It takes a long time to download an animation. – About 3 to 4 seconds for a still image (one frame). – About 1 to 2 minutes for an animation of 30 frames. – About 4 minutes for an animation of 90 frames. • If a disc inserted does not include any and files, beeps sound when you try to operate the downloading procedure. • If you try to store a 31st image for picture screen, “Picture Full” appears and you cannot start downloading. Delete unwanted files before downloading. • If the total frame number of an animation downloaded exceeds the following number, the frames exceeding that numbers are ignored. – For “OPENING” and “ENDING”: 30 – For “MOVIE”: 90 General settings—PSM • “Auto Dimmer” may not work correctly on some vehicles, particularly on those having a control dial for dimming. In this case, change the “Dimmer” setting to any one other than “Auto.” • If “LCD Type” is set to “Auto,” the display pattern will change to the “Positive” or “Negative” pattern depending on the “Dimmer” setting. • If you change the “Amp Gain” setting from “High PWR” to “Low PWR” while the volume level is set higher than “Volume 30,” the receiver automatically changes the volume level to “Volume 30.” Other main functions Assigning titles to the sources • If you try to assign a title to a 31st disc or a 31st station frequency, “Name Full” appears and you cannot enter the text entry mode. Delete unwanted titles before assignment. • Titles assigned to discs in the CD changer can also be shown if you playback the disc from the receiver. Upper case Lower case Numbers and symbols Available characters on the display In addition to the Roman alphabets (A – Z, a – z), the following characters will be used. • These characters are also used to show the various information on the display. Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies General • Screen suddenly goes off. There is a time limit for some operations. Finish the operation within the time limit. • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Reset the receiver (see page 3). • “Connect Error” appears on the display. The control panel is not attached correctly. Remove the control panel, wipe the connector, then attach it again (see page 40). • “Push Reset” appears on the display and the control panel movement is freezed. Something is blocking the control panel movement. Reset the receiver (see page 3). If this does not work, check the installation. FM/AM• SSM automatic presetting does not work. Signals are too weak. Store stations manually. • Static noise while listening to the radio. The antenna is not connected firmly. Connect the antenna firmly. Disc playback • The receiver needs some time to start playback the audio CD. The built-in shock-proof circuit is working. • CD-R/CD-RW cannot be played back. • Tracks on the CD-R/ CD-RW cannot be skipped. CD-R/CD-RW is not finalized. • Insert a finalized CD-R/ CD-RW. • Finalize the CD-R/CD-RW with the component which you used for recording. • Disc cannot be ...
Log: