Assessments - 3, GPA: 5
(
)
)
|
Facilidade de uso
5. You may “stuff” excess cord into the back of the unit and feed the cord through the notch for convenient storage. CAN OPENING TIPS • This Can Opener should not be used to open cans designed to be opened by another method, such as a pull tab, peel-off foil seal, or rolling key. This Can Opener will not open rimless cans or cans with angled corners. • If there is a dent in the rim of a can, open the other end or start the cutting action just beyond the dent. Cans with heavy seams, uneven rims or odd shapes may cause the Can Opener to stall. If this occurs, turn the can slightly by hand to aid the cutting action. • Frozen juices or foods in cardboard cans should be opened as soon as they are removed from the freezer. Aluminum lids will not stick to the Magnet. TO OPEN BOTTLES 1. The bottle opener at the front of the unit will only remove metal bottle caps. Do not use it for screw-off caps, punch in tabs, or on cans with pull rings. 2. To open a bottle, grasp it and position the cap under the metal “hook” in the bottle opener. IMPORTANT: Be sure the “hook” is not under the bottle neck or the glass may break. Hold the can opener with one hand and pull down to pop the cap off with the other one. (C) KNIFE SHARPENING TIPS • Clean and dry knives before sharpening. • Do not attempt to sharpen serrated blades, as this will smooth their edges. Do not attempt to sharpen scissors. USING THE KNIFE SHARPENER 1. There are 2 slots in the Knife Sharpener. Use the big slot for knives with long blades and the little slot for short-bladed knives such as a paring knife. 2. For best results, sharpen the entire blade length in one continuous stroke carefully pulling the blade through the slot and slightly up towards you (See inset). Repeat until you achieve desired sharpness. Wash and dry knives after sharpening. Use caution with blade after sharpening. Cleaning Your Can Opener 1. Before cleaning any part of the Can Opener, unplug the cord. 2. To remove the Blade Assembly for easy cleaning, lift the Lever up and pull the Blade Assembly out (see A). The Assembly can be washed by hand in hot, sudsy water, rinsed or wiped with a sponge and dried thoroughly. It is NOT dishwasher-safe. Reverse the procedure to replace the Blade Assembly. 3. Before replacing the Blade Assembly, wipe the Can Opener body, and area around the drive wheel with a slightly damp cloth or sponge. To remove stubborn spots, wipe surfaces with a nylon or mesh pad and sudsy water. Follow with a clean, damp cloth. Do not use abrasive cleaners on any part of the Can Opener as they can damage the finish. 1. El ensamble de la cuchilla ha sido empacado en carton por separado. Instale la cuchilla alineando las guias con las ranuras, oprima hacia adentro y gire (A) hasta quedar ajustado. 2. Enchufe el cable a un tomacorriente standard de 120 voltios. 3. Alce la palanca, incline la lata de modo que el borde quede debajo de la guia y baje la palanca asegurandose de que la cuchilla este por dentro del borde de ...
Este manual também é adequado para os modelos :Outros acessórios para a casa - EC1200 (162.91 kb)