Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Center the middle rail and secure using 1 5/8” screws. SEAT AND BACK TO ARBOR ASSEMBLY STEP 2 » Determine the height you prefer for the bench seat, usually from 16” to 18” above ground. » Deduct 4 3/4” from the height and mark that height on each “leg” of the arbor, this will locate the bottom of the seat support. » Drive nails in each of the arbor posts at the marked places. » Rest the seat on the projecting nails, line it up front and back with the arbor posts. » Hold the seat firmly to the arbor post and drive 3” screws into all four posts. STEP 3 » Position back 4” above seat, use books or blocks to support the back and steady in place » Position outer edge of back blocks flush with the arbor post. » Secure the back to arbor using 3” screws. LWO Corporation, 3841 N. Columbia Blvd., Portland, OR 97217 (503) 286-5372 (800) 459-8718 www.arboria.com...