Click the “Trust in the text” or “Play” button to close the message. Click the screen again to play the movie. Next CATEYE URBAN WIRELESS Quick Start Manual Contents Click the item you wish to view. r V. "N Setting up the computer V. How to install the bracket (movie) V. How to install the speed sensor (movie) Operation of buttons Set up the computer by operating the bu Check the button position before you sta Front MODE Press the MODE button on the front of the computer. tton

FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE Installation and service must be performed by a qualified installer, service agency or the gas supplier. WHAT TO DO IF YOU SMELL GAS: • Do not try to light any appliance. • Do not touch any electric switch; • Do not use any phone in your building. • Immediately call your gas supplier from your neighbor’s p

Please refer to this guide for instructions on how on use of the CD player. Dealer Installation This section intended for use by authorized dealer personnel only Getting Ready To Start The Sonic Immersion System can only be installed on spas with the following serial numbers. Table 1 Sonic Immersion System Ready Spas Model Serial Number Aurora HP 91275 or higher Aurora II 91210 and higher (Also 91184) Aurora XLT 91295 and higher Caliente HP 91301 and higher (Also 91290 and 91299) Californian 911

147th Street Miami, Florida 33054 h e a l t h a n d r e l a x a t i o n f o r l i f e L100 SERIES WITH OPTIONS OWNER’S MANUAL VITA INTERNATIONAL 2320 N.W. 147th Street Miami, Florida 33054 OWNER’S RECORD DATE PURCHASED: _____________________________________ DATE INSTALLED: _______________________________________ DEALER: _______________________________________________ ADDRESS: _____________________________________________ TELEPHONE: ___________________________________________ SERIAL #: __________

Patent Numbers 6,295,980 5,318,007 - 5,228,618 5,201,307 - 4,595,825 _WARNING_ FOR YOUR SAFETY - READ BEFORE OPERATING • If you do not follow these instructions exactly, a fire or explosion may result, causing property damage, personal injury or loss of life. • Improper installation, adjustment, alteration, service or maintenance can cause property damage, personal injury or death. Installation and service must be performed by a qualified installer, service agency or the gas supplier. • Do

11.4 Activate jets Pump 1 This button controls jets pump #1. Press once to turn on jets pump #1. Press a second time to turn pump off. 11.5 Activate jets Pump 2/Pump 3 On two pump models, this button controls jets pump #2. Press once to turn on jets pump #2. Press a second time to turn pump off. On three pump Maxxus models, this button controls both jets pump #2 and jets pump #3 in the following sequence: 1. Press once to turn on jets pump #2. 2. Press a second time to turn on jets pump #3. 3. P

Do not modify this Solar Light and do not use this Solar Light for a purpose for which it was not intended. 13. Do not set up the Solar Light if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not set up the Solar Light. 14. Keep the Solar Panel free of dirt, dust and grime. Dust covering the Solar Panel will block out sunlight causing a decrease or stoppage of effi

ST Indicates heater is in standard mode. Ec Indicates heater is in economy mode. SL Indicates heater is in sleep mode. 9800 Electronic Control Operation When first powered up, the 9800 electronic system will perform a self-diagnostic check and then it will automatically heat to and maintain a temperature of 100°F (37.5°C) until you change the set temperature as listed in the “Temperature Adjustment” section below. These instructions will describe features and options that your particular spa may

first 24 hours. Put the cover on and allow the spa to heat to desired 17. temperature. Adjusting The Proper Bromine Levels After start up, decrease the filtration cycle to F-4 1. and monitor the bromine level until it is within the recommended range. Use bromine test strips to achieve a 3-5 ppm 2. recommended level. Note: It can take several days for the bromine level to stabilize because the fill water that was used sometimes contains contaminants that need to be neutralized, thereby using up t

Table of Contents SAFETY FIRST...............................................................................................................................................1 IMPORTANT SAFETY INSTRUCTIONS..............................................................................................1 READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY...................................................................................................................1 HYPERTHERMIA............................