Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
308876K For dispensing a wide variety of single component sealants and adhesives. 4000 psi (28 MPa, 276 bar) Maximum Fluid Working Pressure 120 psi (0.84 MPa, 8.4 bar) Maximum Air Inlet Pressure See page 2 for Table of Contents Part No. 965766 Stainless Steel Wetted Parts, Machine Mount Valve Part No. 965767 Aluminum Wetted Parts, Hand–held Valve with internal air switch Part No. 965768 Aluminum Wetted Parts, Hand–held Valve with electric switch for remote operation Part No. 965786 Aluminum Wetted Parts, Automatic Machine Mount Valve Part No. 243482 Stainless Steel Wetted Parts, Precision Swirl Orbiter Mounted with Nozzle Accessory Part No. 243666 Stainless Steel Wetted Parts, PrecisionFlo Control Valve Machine Mount Valve 8370A Model 965768 shown Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. Table of Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operation/Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Graco Standard Warranty . . . . . . . . . . . . . . . . . . . . . . 30 Graco Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Symbols Warning Symbol WARNING This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions. Caution Symbol CAUTION This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions. WARNING SKIN INJECTION HAZARD Spray from the valve, hose leaks, or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury. . Fluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate surgical treatment. . Do not point the valve at anyone or at any part of the body. . Do not stop or deflect leaks with your hand, body, glove or rag. . Be sure the valve trigger safety operates before dispensing. . Lock the valve trigger safety when you stop dispensing. . If the nozzle clogs while dispensing, fully release the trigger immediately. . Follow the Pressure Relief Procedure on page 8 whenever you: are instructed to relieve pressure; stop dispensing; clean, check, or service the equipment; and install or clean the nozzle. . Tighten all fluid connections before operating the equipment. . Check the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immediately. Permanently coupled hoses cannot be repaired; replace the entire hose. . Use only Graco approved hoses. Do not remove any spring guard that is used to help protect the hose from rupture caused by kinks or bends near the couplings. 2 308876 WARNING INSTRUCTIONS EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury. . This equipment is for professional use only. . Read all instruction manuals, tags, and labels before operating the equipment. . Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco distributor. . Do not alter or modify this equipment. Use only genuine Graco parts and accessories. . Check equipment daily. Repair or replace worn or damaged parts immediately. . Do not exceed the maximum working pressure stated on the equipment or in the Technical Data for your equipment. Do not exceed the maximum working pressure of the lowest rated component in your system. . Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Technical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings. . Do not use hoses to pull equipment. . Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 180F (82C) or below –40F (–40C). . Comply with all applicable local, state, and national fire, electrical, and safety regulations. . Never use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in this equipment. Such use could result in a serious chemical reaction, with the possibility of explosion, which could cause death, serious injury, and/or substa...
Este manual também é adequado para os modelos :Outras ferramentas - 965766 (250.11 kb)
Outras ferramentas - 243482 (250.11 kb)
Outras ferramentas - 308876 (250.11 kb)
Outras ferramentas - 965767 (250.11 kb)