Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
This adapter effectively provides Ethernet data and DC power to a non-PoE device with a single cable and allows it to operate within a PoE network. PoE is an efficient and convenient solution for remote applications where available space is limited and/or no power source is readily available. Following is a sample PoE Splitter application. Features • Adjustable Output Range: 5v, 7.5v, 9v, and 12v • IEEE802.3af compliant • Short circuit protection • Delivers DC power and data to no-PoE devices • Plug-and-Play • Light weight and compact • Perfect for Wireless AP, Bluetooth AP, IP Cameras, IP Telephones, and remote power-feeding applications • Two different-sized detachable power cables for added flexibility Package Contents • (1) Power over Ethernet Splitter • (2) DC Power Cables – 5.5x2.0mm and 5.5x2.5mm • User's Manual PoE Splitter DC Power Cables User's Manual With adjustable output Figure 1-1. Package Contents Compare the contents of your Power over Ethernet Splitter package with the standard checklist above. If any item is missing or damaged, please contact your local dealer for service. Hardware Description Unicom's Power over Ethernet Splitter Adapter has three connection ports, one LED indicator, and a voltage adjustment DIPswitch. • Data In port: This is an RJ-45 Ethernet interface port for data transmission into the PoE Splitter. This port connects with a PoE injector. The Data In port • Data Out port: This is an RJ-45 Ethernet port and has a detachable RJ-45 cable for connecting with a PoE device such as a camera. • Power Out port: The adapter supports and includes two types of power cables – 5.5 x2.0mm and 5.5x2.5mm. The Power Out port transmits DC power to a 5V, 7.5V, 9V or 12V device. Data Out and Power Out ports • LED indicator: The splitter features one system Power LED indicator. It is located on the top of the Power over Ethernet Splitter. System Power LED indicator • DIPswitch: The DIPswitch changes the splitter voltage allowing for it to operate with a variety of products. It provides four voltage values – 5V, 7.5V, 9V and 12V. The default is 5V. Before adjusting the DIPswitch, disconnect the power from Splitter Adapter. DIPswitch Installation To install the Power over Ethernet Splitter, please follow the steps below. 1. Use an RJ-45 cable to connect the Data In port on the Power over Ethernet Splitter Adapter with the Data Out port of a PoE Hub. If the hub does not support PoE function, you'll need to install a PoE Injector (pn: POE-32001T) between the hub and splitter. 2. Use an RJ-45 cable to connect the Data Out port on the PoE Splitter Adapter to a remote device (Such as a router, access point, camera, etc.). 3. Choose the proper power cable (either 2.0mm or 2.5mm) and plug the straight end into the Power Out port on the Splitter. 4. Plug the right-angle end of the power cable into the device’s power port. 5. Adjust the Voltage on the Splitter to match the remote device. It supports four voltage values – 5V, 7.5V, 9V and 12V. The default value is 5V. Before adjusting the DIPswitch, please disconnect the power from the Splitter Adapter. 6. Before powering on the system, ensure all connections and the voltage is set correctly. • The PoE Splitter connects to the Switch or POE Injector in the Data In port. • The PoE Splitter connects to the remote device through two connection ports – Data Out and Power Out. • The voltage is set correctly: 5V, 7.5V, 9V and 12V. Technical Specification Standard IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3af Power over Ethernet Power jack (2) Power Cables, each with straight and a right angle plugs Plug dimension: 5.5 x 2.0mm, 5.5 x 2.5mmdiameter DIPswitch Four-segment output voltage switch Connector Data / Power In: 1 x RJ-45.Data pin 1,2,3,6 Power pin: 4,5(V+), 7,8(V-) and 1,2(V+), 3,6(V-) Data Out: 1 x RJ-45, Data pin 1,2,3,6 Power out jack: 5V, 7.5V, 9V, 12V (Adjustable) Maximum feeding current: 2.0A@5V Network Cable 10Base-T: 2-pair UTP/STP, Cat.3, 4,5 cable, EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP, Cat.5e cable, EIA/TIA-568 100-ohm (100m) LED System: power (green) Power Input DC 48V Operating 0.~ 40., 90% Humidity (non-condensing) environment Dimension 80mm x 55mm x 26mm (L x W x H) EMI & Safety FCC Class B, CE, CE/EN60950 908 Canada Court City of Industry, CA 91748 U.S.A. Phone: 626.964.7873 or 800.346.6668 Fax: 626.964.7880 e-mail: info@unicomlink.com UNIDOC020905 ...