Assessments - 5, GPA: 4 ( )

Fabricante : Kathrein Arquivo Tamanho: 1.19 mb Arquivo Nome : Língua de Ensino:

Open up the mast clamp and fi x the antenna onto the mast. Slightly screw the wing nuts on the mast clamp so that the antenna can be aligned to optimum reception Fig. 2 Cable connection housing (Fig. 3-4) 1. Unscrew the knurled screw on the cable connection housing and remove the cover 2. Isolate the cable 3. Open the cable connection clamp and stress-resisting clamp on the cover 4. Connect the cable and clamp in fi rmly 5. Replace cover and screw down fi rmly 6. Lay the cable according to the local conditions so that it does not fl utter in the wind and chafe (use cable clamps, insulating tape or cable ties) 7. To avoid ingress of moisture in the mast or brickwork, lay the cable (Fig. 4) Antenna alignment 1. Align the antenna for optimum reception by turning it. To do this, select a channel on the TV set or use an antenna measuring instrument 2. Tighten the wing screws on the mast clamp Fig. 3 Fig. 4 DVB-T signals can also be transmitted in vertical polarisation. In order to receive vertically polarised signals, the ZTA 11 (218010) boom is required. Together with the boom, the antenna must be mounted rotated 90° counter-clockwise in longitudinal alignment to the transmitter. The rotational direction must be observed to avoid water seeping through the cable inlet into the connection socket. When properly mounted, the cable exit is directed downwards and the Kathrein signature can be read horizontally (Fig. 6). If mounted incorrectly, the Kathrein signature will be upside-down. 450 mm Fig. 5 60 mm O max. ZTA 11 Recommended accessory: ZTA 11 Boom - 218010 (Not included in the delivery scope) Cable exit tilted slightly downwards Fig. 6 transmitter 935.434/C/ Type AV 06 AV 09 AV 11 AV 12 Order no. 211450 211453 211463 211473 Channels 5-12 5-12 5-12 5-12 Gain dB 5-6.5 6-9 7-11 7.5-12.5 Elements 4 6 9 11 Reception range MHz 174-230 174-230 174-230 174-230 Half-power beam width Horiz.°/vert.° 67-60/125-95 69-50/110-64 61-41/90-49 60-38/83-42 Front-to-back ratio dB 14-17 12-19 18-27 18-26 Mast clamp range mm O 22-60 22-60 22-60 22-60 Length mm 630 1,300 2,250 3,315 Wind load N 28 39 65 77 Packing unit/weight pc./kg 1/1.1 1/1.6 1/2.3 1/3.0 Packing unit dimensions mm 930 x 180 x 130 930 x 180 x 130 1,260 x 160 x 110 1,510 x 160 x 110 Type ZSD 48 ZSF 47 ZSF 48 ZSH 47 ZSH 48 ZSH 59 ZSH 62 .) Order no. 218380 218385 218381 218386 218394 218382 218383 Length L m 2 x 2 = 4 2 x 2.5 = 5 2 x 2.5 = 5 2 x 3 = 6 2 x 3 = 6 2 x 3 = 6 2 x 3 = 6 Diameter D1/D2 mm 40/48 40/48 40/48 40/48 40/48 48/60 48/60 Cable entry points 3 -3 -3 5 5 Grade (steel) St. 52 St. 37 St. 52 St. 37 St. 52 St. 52 St. 52 Wall thickness in clamping range mm 2.5 2 2.5 2 2.5 2.5 4.5 Perm. bending moment .), useful length at 800 N/m. 5.0 m 4.0 m 3.0 m - - 1,170 - 500 540 - 1,040 1,080 320 430 - 850 960 - 1,150 1,280 - 1,950 (1,150) 2,120 (1,280) - Perm. bending moment .), useful length at 1,100 N/m. 5.0 m 4.0 m 3.0 m - - 1,110 - 390 480 - 920 1,000 160 300 - 700 840 - 900 1,080 - 1,700 (900) 1,960 (...

Baixe o seu

Para fazer o download, introduza 2 dígitos :