Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Outros componentes - ICP5045BL (30.84 kb)
Outros componentes - ICP5045BL (31.05 kb)
Outros componentes - ICP5045BL (213.11 kb)
Facilidade de uso
4.17 RAID 10/50/60 array leg limitations A RAID 10, RAID 50, or RAID 60 array cannot have more than 32 legs when created using the Build method. Maximum disk drive count is only limited by RAID level. For instance, a RAID 10 array built with 32 RAID 1 legs (64 disk drives) is supported; a RAID 5 array built with 32 RAID 5 legs (96 disk drives) is also supported. Although you can create a RAID 10 array with more than 64 drives using the Quick Init method, the maximum number of build/verify operations that can happen at any one time is 32; therefore, such an array could not be verified. 4.18 Microsoft VDS Storage Manager LUN Error On some systems when creating a new LUN, the Microsoft VDS Storage Manager for SANs snap-in may not work properly and crash with an MMC snap-in error. 4.19 ICP5085BR controller On Intel 945X or 955X motherboards with Mode0 set, the controller is not recognized when installed in the primary 16x PCIe slot. 4.20 UnixWare and OpenServer Adding or moving controllers in an existing UnixWare or OpenServer system may cause some device resources to change, which may lead to the operating system being unable to boot. Currently, there is no workaround available in the operating system. Before installing the operating system, make sure all PCI devices are either enabled or installed. The individual behavior and affected devices will vary from system to system. This is due to the different ways in which motherboards may handle their PCI bus layouts, and how those layouts could be changed when installing or rearranging devices. If the bus layout changes and affects a critical system device (video, boot controller, etc.) then the operating system may be unable to recover from that change and be non-bootable. 4.21 SATA disks do not support Dual Path with Expanders Connect Dual Path SAS Enclosures with 2 Expanders only via one Expander when using SATA disks, SATA disks do not support Dual Path. If SATA disks are connected using 2 Expanders the controller BIOS may crash. 4.22 Usage of firmware, utilities and flash tools Use only the utilities/flash tools included with this release. Upgrade any existing tools to those included with this release, as this release may support additional features that were not available with previous releases. 4.23 DOS OS not supported The DOS environment is supported for Adaptec tool execution only (AFU.EXE and ACU.EXE). 4.24 DAT drive restoration fails when spanning tapes When restoring from two or more tapes with a Sony SDX-470, Sony SDX-570, or Quantum DLT V4 DAT drive, the operation aborts automatically when restoring the second tape but gives the (erroneous) message "Restore Operation has Completed". -------------------------------------------------------------------- (c) 2007 Adaptec, Inc. All Rights Reserved. This software contains the valuable trade secrets of Adaptec or its licensors. The software is protected under internati...