Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
(3) LED light
Before the use of LED
light, always pull the
power switch once.
Press
the LED
light on button.
The light illuminates
Battery Pack Life
with very low current,
The rechargeable batteries have a lim-
and it does not ad-
ited life. If the operation time becomes
versely affect the per-
extremely short after recharging, re-
formance of the tool
place the battery pack with a new one.
during use or its bat-
Battery Recycling
tery capacity.
ATTENTION:
CAUTION:
For environmental protection and
• The built-in LED light is designed to illu-
recycling of materials, be sure that
minate the small work area temporarily.
it is disposed of at an officially as-
• Do not use it as a substitute for a
signed location, if there is one in
regular flashlight, since it does not
your country.
have enough brightness.
• LED light turns off when the tool
Battery charger
has not been used for 5 minutes.
Charging
Caution : DO NOT STARE INTO BEAM.
Cautions for the Li-ion Battery
Use of controls or adjustments or perform-
Pack
ance of procedures other than those speci-
fi ed herein may result in hazardous radiation
• Make sure the terminals of the
exposure.
battery charger are not contaminated
with liquid, grease or other
Battery pack
substances before charging the
For Appropriate Use of Bat tery Pack
battery pack.
If you notice the terminals of the
Li-ion Battery Pack (EY9L80)
battery charger contaminated, be
• For optimum battery life, store the
sure to wipe or take them off before
Li-ion battery pack following use
use. The life of the battery pack
without charging it.
may adversely be affected when
• When battery pack is not in use,
the terminals are clogged with the
keep it away from other metal ob-
dust or dirt which becomes solid
jects like: paper clips, coins, keys,
with liquid or grease.
nails, screws, or other small met-
• If the temperature of the battery
al objects that can make a connec-
pack falls approximately below -10°C
tion from one terminal to another.
(14°F), charging will automatically
Shorting the battery terminals togeth-
stop to prevent degradation of battery.
er may cause sparks, burns or a fire.
Common Cautions for the Li-
• When operating the battery pack, make
ion/Ni-MH/Ni-Cd Battery Pack
sure the work place is well ventilated.
• When the battery pack is removed
• The ambient temperature range is be-
from the main body of the tool, re-
tween 0°C (32°F) and 40°C (104°F).
place the battery pack cover imme-
If the battery pack is used when the bat-
diately in order to prevent dust or dirt
tery temperature is below 0°C (32°F),
from contaminating the battery termi-
the tool may fail to function properly.
nals and causing a short circuit.
• When charging a cool battery
pack (below 0°C (32°F)) in a warm
place, leave the battery pack at the
place and wait for more than one
hour to warm up the battery to the
- 9 -
...