Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
If you use it within 2 hours of going to bed, it could disrupt your sleep. -If you find it difficult to get up each day without an alarm clock or if you often sleep in, you need morning light. Use the goLITE BLU within the first hour or two after waking up. -If you find it difficult to stay awake in the late evening and wake up too early in the morning, you need evening light. Use the goLITE BLU before you star t to feel drowsy. -If mornings or evenings do not seem to be the problem, but you feel generally tired during the day, then the time at which you use the goLITE BLU is not as impor tant.You can use the goLITE BLU in the morning or around midday. For example, when you wake up in the morning, use it for 15 to 30 minutes and then again at midday or in the evening for approximately the same amount of time. Place the goLITE BLU fur ther away from you during the evening session. Do not use the goLITE BLU within two hours of your desired bedtime or you may not be able to fall asleep. 12 EnglisH installation 1 2 3 4 Remove the stand from the stand storage cavity (Fig. 2). Insert the bevelled end of the stand into the hole on the back of the appliance. Magnets hold the stand in place (Fig. 3). Put the adaptor in the wall outlet and insert the appliance plug into socket on the appliance (Fig. 4). Place the goLITE BLU approximately 20-30 in./50-75cm from your eyes in such a way that the light bathes your face from the side (Fig. 5). -You can read, eat, work at the computer, watch TV or exercise while you use your goLITE BLU energy light. -For the best results, place the goLITE BLU at the same level as your midriff (stomach area), e.g. place it on the table at which you are sitting. Note: Do not stare into the light of the LED panel. It is sufficient that the blue light reaches your eyes indirectly from the side. -Use your goLITE BLU in a well-lit room to minimize eye strain. demo mode The demo mode is used to demonstrate the goLITE BLU energy light in stores. When the appliance is turned on in demo mode, customers of the store can: -adjust the light intensity -turn the appliance on and off -set the light time If the appliance is not operated for 3 minutes, it rever ts to its demo mode default settings. To activate the demo mode: 1 2 Put the adaptor in the wall outlet and insert the appliance plug into socket on the appliance (Fig. 4). Press and hold both the on/off button and light intensity button for 3 seconds (Fig. 6). EnglisH 13 The appliance turns on and the segments of the timer indicator go , on and off in a rotating pattern. The LED panel goes on at the low light intensity level. , Note:The appliance remains turned on in demo mode until it is turned off. To deactivate the demo mode, press and hold the on/off button and light intensity button together for 3 seconds. Note:If the appliance has been in DEMO mode for 10 hours, or it is unplugged, the appliance will turn off, and the DEMO mode will be deactivated. Using the appliance Use this appliance for its intended household use as described in this manual. 1 2 Put the adaptor in the wall outlet and insert the appliance plug into the socket on the appliance (Fig. 4). Press the on/off button briefly to turn on the appliance (Fig. 7). The first segment of the time indicator goes on and blinks for 3 , seconds (Fig. 8). When the time indicator stops blinking, the LED panel goes on and , the timer starts counting down to the set time (Fig. 9). Note:The timer is automatically set to 15 minutes. Note:The LED panel only goes on after the time indicator stops blinking.This prevents the light from shining into your eyes while you are setting the time. 3 If you want to switch off the appliance before the set time has elapsed, press the on/off button 2 seconds. Note:You can also switch off the appliance by briefly pressing the on/off button a few times. Note:The appliance will automatically switch off after the set time duration. 4 Unplug the appliance after use. 14 EnglisH setting the Timer 1 2 Press the on/off button briefly to switch on the appliance (Fig. 7). Press the on/off button one or more times to select the preferred time (15, 30, 45 or 60 minutes) (Fig. 10). The corresponding segment or segments of the time indicator will , blink for 3 seconds. When the time indicator stops blinking, the LED panel goes on and , the timer starts counting down the set time. Note: If you want to set the timer to 0 minutes, press the on/off button until all segments of the time indicator are off. Note:The time indicator only shows the time remaining. setting the light intensity 1 2 3 Press the on/off button briefly to switch on the appliance (Fig. 7). Press the light intensity button repetitively and the light intensity options of low, medium and high will be displayed (Fig. 11). Choose the light intensity desired. Cleaning Never immerse the appliance in water or any other liquid, nor rinse it under the tap. Never use scouring pads, abrasive cleaning agents or aggressive liqu...