Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
(Fig. 14) The $appears on the display. (Fig. 15) , If you want no sound at wake-up time, select level 0. setting the light intensity level 1 Use the light adjustment wheel @ to set the light intensity level. (Fig. 16) The @appears on the display. , Tip:When you use the appliance for the first time, set the light intensity to 20.The moment you wake up, check which light intensity level the appliance has reached by slightly turning the light adjustment wheel @.When you do this, the current alarm light intensity level appears on the display. Set the alarm light intensity to this level for the next day. If you do not want the light to go on at wake-up time, select light intensity level 0. Quick alarm check 1 Press the QUICK CHECK button to start an accelerated wake-up alarm test (Fig. 17). The light ring round the QUICK CHECK button goes on (Fig. 18). , 10 EnglisH During the first 50 seconds of the test, you see a rapid increase of the light intensity to the , selected level. During the last 40 seconds, you hear the selected sound gradually increase tothe selected level. Press the QUICK CHECK button again to stop the test (Fig. 17). The light ring round the QUICK CHECK button goes out. , Note:The appliance continues to run the accelerated wake-up alarm test until you press the QUICK CHECK button again. switching the alarm on or off The light ring round the ALARM button is on when the alarm is on. At the set time, the wake-up sound is played and the lamp has reached the selected light intensity level. 1 Press the 3button to switch off the light and the wake-up sound. (Fig. 19) The light ring round the ALARM button continues to burn.The alarm function is still active , and the wake-up alarm will go off at the set time and with the set sound and light intensitythe next day (Fig. 13). Press the #button if you want to switch off the sound when the alarm goes off. (Fig. 20) Press the @& button if you want to switch off the lamp when the alarm goes off. (Fig. 21) If you want to switch off the alarm function altogether, press the ALARM button one ormore times until there is no sound symbol on the display and the light ring round the ALARM button goes out. snoozing 1 Press the SNOOZE/SCREEN BRIGHTNESS CONTROL button to switch off the sound for 9minutes when the alarm has gone off (Fig. 22). The lamp continues to burn at the selected intensity level. After 9 minutes, the wake-up sound is automatically played again. Press the SNOOZE/SCREEN BRIGHTNESS CONTROL button longer to dim the light. Note:You can only do this once. After you release the button, it functions as SCREEN BRIGHTNESS CONTROL button again. Note:You can only use the snooze function within 15 minutes after the alarm starts to go off. After those 15 minutes, the button no longer functions as SNOOZE button and only functions as SCREEN BRIGHTNESS CONTROL button. adjusting the light intensity during the wake-up phase 1 Turn the light adjustment wheel @to select a higher or lower light intensity. (Fig. 16) The lamp burns at the selected intensity during the rest of the wake-up phase. adjusting the brightness of the display Press the SNOOZE/SCREEN BRIGHTNESS CONTROL button to adjust the brightness of the display (Fig. 22). Press the button again to set the brightness to another level. There are three levels. Note:This button cannot be used to adjust the display brightness when the alarm goes off and during snoozing. 3button 1 When the alarm goes off at the set wake-up time, press the 3 button to switch off the wake-up alarm light and sound. EnglisH 11 Note:The alarm function remains active and the light ring round the alarm button continues to burn. When you have switched on the reading lamp and/or the radio, press the 3 button to switch off the reading lamp and/or the radio. When you press the 3button again, only the light goes on. Note:When the alarm function is active, pressing the 3 button does not affect the alarm settings. reading lamp Press the @&button to switch the lamp on or off. (Fig. 21) Turn the light adjustment wheel @upwards or downwards to increase or decrease the light intensity level. (Fig. 16) The light level indication on the display @shows the light intensity level (00 to 20). (Fig. 23) , Tip:We advise you to set the light intensity to 20 (maximum level) for reading. If this light level is not strong enough, switch on an extra lamp. Note: The light intensity level you select is automatically set as the light intensity level for the alarm as well. If necessary, do not forget to set the light intensity level back to the wake-up level! radio 1 Press the RADIO button to switch on the radio (Fig. 24). The light ring round the button goes on (Fig. 25). , Use the %and the ^buttons to select the frequency of your favorite station. (Fig. 26) You can choose FM stations. Note:To scan radio frequencies automatically, press and hold the the %or the ^button for approx. 2 seconds. Press the RADIO button to switch off the radio (Fig. 24). power failure To mak...