Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
-This appliance does not have an on/off switch. If you want to make sure that the appliance is fully isolated from the mains supply, remove the plug of the appliance from the wall socket. general -The duration of the light bath depends on the distance at which the appliance is used. See chapter ‘Using the appliance’ for the appropriate distance and duration. -After the first few light baths, you may experience some eye strain and/or a light headache. These side effects tend to disappear quickly. -This appliance meets the requirements of Medical Device Directive MDD 93/42/EEC and 2007/47/EC for medical appliances. symbol key The following symbols may appear on the appliance: Symbol Description Consult the user manual supplied HF3319 Model number European Declaration of Conformity 0344 0/I Off/On EnglisH Class II equipment Compliant with the Waste Electrical and Electronic Equipment/Restriction of the Use of Cer tain Hazardous Substances in Electrical and Electronic Equipment (WEEE) recycling directives. General warning symbol Philips Shield Manufactured for : Philips Consumer Lifestyle B.V, Tussendiepen 4, 9206 AD Drachten,The Netherlands. Fax: +31 (0)512594316 Date CodeYYYYWWSymbol Description using the appliance -It is advisable to star t using the EnergyLight as soon as you feel the winter blues coming on or when you feel like you need extra light. -Preferably take your light baths between 6 o’clock in the morning and 8 o’clock in the evening. (Fig. 2) Tip:Visit for more information on when to use the EnergyLight in your case. 1 2 3 Place the appliance on a tabletop. Put the plug in the wall socket. To switch on the appliance, turn the on/off knob clockwise to the light intensity you prefer. Duration The advisable duration of the light bath depends on the distance at which the appliance is used: -approx. 2 hours at a distance of 50cm -approx. 1 hour at a distance of 30cm -approx. 30 minutes at a distance of 15-20cm treatment time indicator The treatment time indicator shows how long you have been using the appliance. -When you switch on the appliance, the LEDs go on in quick succession to show how the LED sequence is built up.Then the first LED lights up at half intensity during the first 15 minutes (Fig. 3). -At the end of the first 15 minutes, the first LED is on at full intensity and the second LED goes on at half intensity. -After 2 hours, all 8 LEDs light up at full intensity until you switch off the appliance. Note:The LEDs only show the treatment time that has passed.You do not have to take any action when the LEDs go on. 4 Position yourself near the appliance and turn the screen in such a way that you can comfortably look in the direction of the light (Fig. 4). Make sure there is a distance between your face and the screen of 15 to 50cm. -You do not need to sit right in front of the appliance -You do not have to take the whole light bath without interruption. If it suits your schedule better, you can interrupt your light bath and continue later. 5 Look into the light every now and then. EnglisH Do not look into the light continuously.You can simply engage in other activities such as reading, writing, embroidering or handicraft while taking a light bath and look into the light ever y now and then. 6 Repeat the light baths until you feel better. Generally, improvements occur within 1 week. You may repeat the light bath as often as you like during the dark period of the year. Take a light bath on at least 5 successive days. 7 After use, turn the on/off knob anticlockwise to switch off the appliance. Note: Do not turn the on/off knob clockwise to the OFF setting. 8 Remove the mains plug from the wall socket. cleaning Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Do not let water run into the appliance or spill water onto the appliance (Fig. 5). 1 2 Unplug the appliance and let it cool down. Clean the outside of the appliance with a damp cloth (Fig. 6). replacement Except for the tube lamps, the appliance does not contain any ser viceable par ts.The tube lamps have to be replaced when they stop burning or after a period of 1,700 burning hours (i.e. after many years of normal use).The tube lamps must be replaced with original Philips EnergyLight PL-L 36W tube lamps. Have the tube lamps replaced by a ser vice centre authorised by Philips. Only they have the knowledge and skills required for this job and the original spare par ts for the appliance. Environment -Tube lamps contain substances that may pollute the environment. Always remove the tube lamps before you discard and hand in the appliance at an official collection point. Dispose of the tube lamps at an official collection point for chemical waste. -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preser ve the environme...