Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
(in the US) For product disposal, contact your local government agency or (in the US) or (in Canada). For more information, call your dealer. • If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the inside of the projector, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself. • If the lamp should break (it will make a loud bang when it does), Disconnect ventilate the room well, and make sure not to breathe the gas that the plug comes out of the projector vents, or get it in your eyes or mouth. from the • Before replacing the lamp, turn the projector off and unplug the power power cord, then wait at least 45 minutes for the lamp to cool sufficiently. outlet Handling the lamp while hot can cause burns, as well as damaging the lamp. • Never unscrew except the appointed (marked by an arrow) screws. • Do not open the lamp cover while the projector is suspended from the ceiling. This is dangerous, since if the lamp’s bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. To replace the lamp, make sure that the screws are tightened firmly. Loose screws could result in damage or injury. • Use only the lamp of the specified type. • If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp bulb to burst during use. • Using the lamp for long periods of time, could cause it dark, not to light up or to burst. When the pictures appear dark, or when the color tone is poor, please replace the lamp as soon as possible. Do not use old (used) lamps; this is a cause of breakage. ENGLISH 9 Lamp (continued) A lamp has a finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact your dealer and tell the lamp type number. Type number = DT00731. 1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes. 2. Prepare a new lamp. If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. Lamp cover In the case of replacement by yourself, 3. Loosen the lamp cover screw (marked by arrow) remove it. to lock it in place. fasten the lamp cover screws. menu. when the EASY MENU has appeared, please perform the next step (2). (2) Point at the “Go To Advance Menu …” in the menu using Ў/^ button, then press the > button. (3) Point at the “OPTION” in the left column of the menu using Ў/^ button, then press the > button. (4) Point at the ”LAMP TIME” using Ў/^ button, then press the > button. A dialog will appear. (5) Press the ^ button to select “RESET” on the dialog. It performs resetting the lamp time. NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. and then slide the lamp cover to the side to 4. Loosen the 2 screws (marked by arrow) of the lamp, and slowly pick up the lamp by the handles. 5. Insert the new lamp, and retighten firmly the two screws that are loosened in the previous process 6. Slide the lamp cover back in place and firmly 7. Turn the projector on and reset the lamp time using the LAMP TIME function in the OPTION (1) Press the MENU button to display a menu. Only Screw Handle Screws 10 ENGLISH If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn and/or malfunction to the projector. When the indicators or a message prompts you to clean the air filter, clean the air filter as soon as possible. Air filter WARNING >Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause an electric shock, a burn and/or malfunction to the projector. >Use only the air filter of the specified type. Do not use the projector with the air filter and the filter cover removed. It could result in a fire and/or malfunction to the projector. >The air filter should be cleaned periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn and/or malfunction to the projector. NOTE • Please replace the air filter when it is damaged or too soile...
Este manual também é adequado para os modelos :Projetores - CP-S245 (1.71 mb)
Projetores - CP-X250 (1.71 mb)
Projetores - CP-X255 (1.71 mb)