Procedure of adjustment ADVANCED MENU DIGITAL CINEMA REALITY AUTO FORMAT SMPTE BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING OFF SYNC.TERM 75 RASTER POSITION :MENU SELECT ENTER:SUB MENU MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY :MENU SELECT ENTER:SUB MENU BLANKING UPPER 0 LOWER 0 LEFT 0 RIGHT 0 :MENU SELECT :ADJUST Press button to move the blanking zone upward; button to downward. Press the “MENU” button. The MAIN MENU screen will be displayed. Select the “ADVANCED MENU” with the buttons. Press the “ENTER” button. The ADVANCED MENU screen will be displayed. Select “BLANKING” with the buttons. Press the “ENTER” button. The BLANKING adjustment screen will be displayed. Select the desired item for adjustment with the buttons. Adjust blanking with the buttons. The value changes from 0 to 511. Press button to move the blanking zone upward; button to downward. screen (right) > Press button to move Press button to move the blanking zone to the the blanking zone to the right; button to the left. right; button to the left. Adjusting the input resolution Input resolution adjustment achieves the best image when the screen flickers or halo is observed around the contour. Procedure of adjustment Press the “MENU” button. MAIN MENU Note ADVANCED MENU DIGITAL CINEMA REALITY AUTO FORMAT SMPTE BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING OFF SYNC.TERM 75 RASTER POSITION :MENU SELECT ENTER:SUB MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY :MENU SELECT ENTER:SUB MENU INPUT RESOLUTION TOTAL DOTS 1056 DISPLAY DOTS 832 TOTAL LINES 666 DISPLAY LINES 624 :MENU SELECT :ADJUST The MAIN MENU screen will be displayed. Select the “ADVANCED MENU” with the buttons. Press the “ENTER” button. The ADVANCED MENU screen will be displayed. Select “INPUT RESOLUTION” with the buttons. Press the “ENTER” button. The INPUT RESOLUTION screen will be displayed. Select one of the following items with the buttons and adjust it with the buttons. “TOTAL DOTS”, “DISPLAY DOTS”, “TOTAL LINES” and “DISPLAY LINES” Each item automatically displays a value in response to the type of the input signal. If vertical stripes appear on the screen or the image is partly missing, increase or decrease the displayed value while observing the screen to achieve the optimal value. • The abovementioned vertical stripes will not appear on the screen when all signals are input. • The picture may be distorted during the adjusting operation, but this is not a fault. • The input resolution can be adjusted only when RGB signal input is applied with RGB1, RGB2 IN, and the analog RGB input module (optional: ET-MD95RGB). How to use ADVANCED MENU Adjusting the clamp position Use the clamp position adjustment to achieve the optimal value when dark areas of the image are crushed or displayed in green. Procedure of adjustment Press the “MENU” button. MAIN MENU ADVANCED MENU DIGITAL CINEMA REALITY AUTO FORMAT SMPTE BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING OFF SYNC.TERM 75 RASTER POSITION :MENU SELECT ENTER:SUB MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY :MENU SELECT ENTER:SUB MENU CLAMP POSITION POSITION 1 :MENU SELECT :ADJUST The MAIN MENU screen will be displayed. Select “ADVANCED MENU” with the buttons. Press the “ENTER” button. The ADVANCED MENU screen will be displayed. Select “CLAMP POSITION” with the buttons. Press the “ENTER” button. The CLAMP POSITION screen will be displayed. Adjust with the buttons. The value changes from 1 to 255. The optimal value for the clamp position adjustment • If dark areas are crushed: The optimal value is the point where the dark area is best improved. • If the dark areas are displayed in green: The optimal value is the point where the green area becomes dark and clear. Note • The clamp position can be adjusted only when the RGB signal input is applied with RGB1, RGB2 IN, and the analog RGB input module (optional: ET-MD95RGB). Edge blending adjustment This projector has the function to hide the seams for multi-screens. Procedure of adjustment Select the “ADVANCED MENU” with buttons. MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY Press the “MENU” button. The MAIN MENU screen will be displayed. the ADVANCED MENU DIGITAL CINEMA REALITY AUTO FORMAT SMPTE BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING ON SYNC.TERM 75 RASTER POSITION :MENU SELECT :CHANGE ENTER:SUB MENU EDGE BLENDING UPPER START 0 OFF WIDTH 128 LOWER START 0 OFF WIDTH 128 LEFT START 0 OFF WIDTH 128 RIGHT START 0 OFF WIDTH 128 MARKER OFF BRIGHT ADJUST :MENU SELECT :ADJUST ENTER:CHANGE The optimal point is where these lines overlap. Press the “ENTER” button...
)
