Assessments - 1, GPA: 5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
BWhen an individual adjustment screen is being displayed DOT CLOCK 32 Only the item displayed will be returned to the factory default setting. 38-ENGLISH Adjusting the picture Press the F or G button on the projector or remote control unit to select an item, and then press the I or H button to change the setting. For the value adjusting items, press the ENTER button to display the adjustment screen, and then press the I or H button to make the adjustment. When an RGB/DVI signal is being input PICTURE PICTURE MODE CONTRAST BRIGHT SHARPNESS COLOR TEMP. WHITE BALANCE R WHITE BALANCE G WHITE BALANCE B STANDARD SELECT:[^][@] ADJUST:[{][}] ESC:[MENU] PICTURE PICTURE MODE CONTRAST BRIGHT COLOR TINT SHARPNESS COLOR TEMP. NR STANDARD SELECT:[^][@] ADJUST:[{][}] ESC:[MENU] When a YPBPR signal is being input When an S-VIDEO/VIDEO signal is being input NATURAL STANDARD DYNAMIC PICTURE MODE AUTO PICTURE PICTURE MODE CONTRAST BRIGHT COLOR TINT SHARPNESS COLOR TEMP. NR TV-SYSTEM STANDARD SELECT:[^][@] ADJUST:[{][}] ESC:[MENU] Select the picture mode that best matches the image source and room conditions. The mode best used in dark rooms is “NATURAL”. For rooms having regular lighting conditions in use, select “STANDARD”. For exceptionally bright rooms, use “DYNAMIC”. Adjustments and settings ENGLISH-39 CONTRAST This adjusts the contrast of the picture. (Adjust the “BRIGHT” setting first if required before adjusting the “CONTRAST” setting.) The picture is bright: I button The picture is dark: H button BRIGHT This adjusts the darker areas (black areas) in the picture. Black areas are too light: I button Dark areas are too solid: H button COLOR (S-VIDEO/VIDEO/YPBPR only) The color is too deep: I button The color is too pale: H button TINT (NTSC/NTSC 4.43/YPBPR only) This adjusts the flesh tones in the picture. The flesh tones are greenish: I button The flesh tones are reddish: H button SHARPNESS To soften the picture details: I button To sharpen the picture details: H button COLOR TEMP. Noise Reduction (NR) (S-VIDEO/VIDEO/480i and 576i YPBPR only) If the signal is of such poor quality that picture interference appears, you can suppress this interference by adjusting the “NR” (Noise Reduction). To turn off the “NR” feature (set the value to “0”): I button To strengthen the effect: H button WHITE BALANCE R/G/B (RGB only) This is used to adjust the white areas of the picture if they appear colorised. To make the selected color lighter: I button To make the selected color stronger: H button STANDARD HIGH LOW This is used to adjust the white areas of the picture if they appear bluish or reddish. 40-ENGLISH TV-SYSTEM (S-VIDEO/VIDEO only) AUTO NTSC NTSC4.43 PAL PAL-M PAL-N SECAM This should normally be set to “AUTO”. If the signal is of such poor quality that the correct format cannot be automatically distinguished, change the setting manually to the required TV system. NOTE: BWhen set to “AUTO”, the projector automatically distinguishes between NTSC/NTSC 4.43/PAL/PAL60/ PAL-M/PAL-N/SECAM signals. Projecting sRGBcompatible pictures sRGB is an international color reproduction standard (IEC61966-21) established by the International Electrotechnical Commission (IEC). If you would like the colors in sRGBcompatible pictures to be reproduced more faithfully, make the following settings. # Press the F or G button to select “PICTURE MODE”, and then press the I or H button to select “NATURAL”. $ Press the F or G button to select “COLOR TEMP.”, and then press the I or H button to select “STANDARD”. % Press the STD (standard) button on the remote control unit. & Press the F or G button to select “LAMP POWER” in the “OPTION” menu, and then press the I or H button to select “HIGH”. NOTE: BsRGB is only enabled when RGB signals are being input. Adjustments and settings ENGLISH-41 Adjusting the position When an RGB signal is being input, press the AUTO SETUP button first to initiate automatic positioning. If the optimum setting is not obtained when “AUTO SETUP” is carried out, adjust by the following procedure. Press the F or G button on the projector or remote control unit to select an item, and then press the I or H button to change the setting. For the value adjusting items, press the ENTER button to display the adjustment screen, and then press the I or H button to make the adjustment. Some items can be adjusted pressing the F or G button. When an RGB/DVI signal is being input POSITION POSITION DOT CLOCK CLOCK PHASE KEYSTONE OSD POSITION RESIZING AUTO SETUP FRAME LOCK STANDARD 32 H: 0 V: 0 OFF OFF ON ON TOP LEFT SELECT:[^][@] ENTER:[ENTER] ESC:[MENU] “POSITION”, “DOT CLOCK” and “CLOCK PHASE” are not displayed when a DVI signal is being input. When a YPBPR signal is being input POSITION Moves the picture position. Press the I or Hbutton to move the picture horizontally. Press the F or Gbutton to move the picture vertically. POSITION H: V: 128 32 POSITION POSITION KEYSTONE OSD POSITION ASPECT RESIZING AUTO SETUP STANDARD H: 32 V: 16 H: 0 V: 0 OF...