INDEX- DIGITAL ZOOM VOLUME TQBH0228 (E/U/EA) Contents Request Regarding Security 3 What you can do 3 Check your computer 4 Necessary environment for computers to be connected 4 Connecting with Wired LAN 4 Network setting of the projector 5 Displaying the NETWORK menu 5 NETWORK 6 Wired LAN settings 6 Default network settings 6 NAME CHANGE 7 NETWORK CONTROL 7 STATUS 8 INITIALIZE 8 Using WebBrowser 9 Before using the WEB control 9 Accessing from the WebBrowser 10 Monitor information window 11 Projector control window 12 Detailed set up window 12 Change password window 16 Switching Languages 16 Using PJLink protocol 17 Applicable commands 17 Glossary 18 Trademarks 18 The illustrations and screenshots in this manual may be different from those on your computer. 2 Request Regarding Security When using this product, security breaches of the type described below are conceivable. • Leakage of your private information via this product • Illegal operation of this product by a malicious third-party • Harm to or cessation of operation of this product by a malicious third-party Be sure to implement sufficient security measures. • Set passwords, and limit the users that are permitted login access. • Make sure the password is as hard to guess as possible. • Change the password periodically. • Panasonic Corporation and its affiliated companies never directly ask customers for their password. Do not give out your password even if directly asked by a third-party representing themselves as Panasonic Corporation. • Always use on a network that has safety protection such as a firewall implemented. What you can do (See page 9) The following operations are possible when using WebBrowser. • Setting and adjusting the projector • Displaying the projector status • Setting for message transmission (See page 17) Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol is used. • Setting the projector • Querying the projector status (Refer to “SERIAL TERMINAL” in “Technical Information” of the Basic Manual.) You can control the projector from a computer, using the control commands of the serial terminals. If you use “WEB control”, “PJLink” or “Command control”, turn [ON] the [NETWORK CONTROL] in the NETWORK menu for the projector. (See page 7) 3 Check your computer Necessary environment for computers to be connected • First, check your computer to see whether or not it has a wired LAN function. LAN : “Glossary” (See page 18) • Before connecting the computer to the projector, be sure to check the following settings. Check 1 For LAN cable • Is the cable properly connected? • Use LAN cable that is compatible with category 5 or above. Check 2 Wired LAN settings • Is your wired LAN switched on? • Is your wired LAN adapter properly recognized? • Is your wired LAN adapter switched on? • Install the wired LAN adapter driver beforehand. For details on how to install the driver, refer to the instructions accompanying the wired LAN adapter. Check 3 For WebBrowser • WebBrowser is necessary to use WEB control. • Compatible WebBrowser : Internet Explorer 6.0/7.0/8.0 Do not touch the LAN terminal or the metal part of the LAN cable, the static electricity may discharge from our hand (body) causing a malfunction. Connecting with Wired LAN Connection can be made with wired LAN. However, confirm to your system administrator on network settings before changing any settings. 1 Turn on the computer. Make the network setting according to your system administrator. 2 If the projector settings are the default settings (See page 6), the computer can be used with the following network settings. IP ADDRESS 192.168.10.101 SUBNETMASK 255.255.255.0 DEFAULT GATEWAY 192.168.10.1 4 Network setting of the projector When making a connection between a computer and a projector with settings other than the default settings, perform the procedure below to display the menu required when changing the initial settings. Displaying the NETWORK menu Press the [MENU] button on the projector. 1 The main menu appears. FUNCTION ENTER SELECT RETURN LANGUAGE PROJECTOR SETUP SECURITY NETWORK POSITION DISPLAY OPTION PICTURE PICTURE MODE CONTRAST BRIGHTNESS COLOR TINT DYNAMIC 0+ 0+ 0+ 0+ SHARPNESS COLOR TEMPERATURE DAYLIGHT VIEW NOISE REDUCTION TV-SYSTEM DEFAULT AUTO OFF AUTO 0+ Select [NETWORK] with the [^Ў] buttons. 2 The network menu appears. LANGUAGE PROJECTOR SETUP SECURITY NETWORK POSITION DISPLAY OPTION WIRED LAN NAME CHANGE STATUS INITIALIZE NETWORK CONTROL ON PICTURE FUNCTION ENTER SELECT RETURN 3 3 Press the [ENTER] button You can select the sub-menu item. Depending on the signals which are input to the projector, it may not be possible to adjust some of the items and use some of the functions. In the case of an item that cannot be adjusted or a function that cannot be used, the corresponding on...
)
