Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
. “3. Basic setting and operation” (pp.17–30). STEP 2 Network Configuration has completed. Follow each chapter to operate the projector. ¦ Operate and manage the projector . “4. Controlling the projector” (pp.31-43) . “Power Control and status check” (p.32) . “Control” (p.34) . “PC adjustment” (p.38) . “Setting up the projector” (p.39) . “Projector information” (p.42) 2 Chapter 2 Setup Procedures Describes how to configure the network. Chapter 2 Setup Procedures Setting procedures and contents differ depending on the LAN installation location. When installing, consult your system administrator to set up the LAN appropriately. Connecting to the LAN line Connect the LAN cable to the LAN connection terminal of the projector. LAN Connection Terminal ACT Lamp (Orange) Blink orange when the projector is sending or receiving the data. LINK Lamp (Green) Light green when the projector is connected to the network correctly. LAN Cable * Please use a shielded LAN cable. Network configuration Set the Wired LAN network through the projector menu. Detailed network settings will be made with browser. Refer to “3. Basic setting and operation” (p.17-30). First, complete the settings described in this chapter before performing steps in “3. Basic setting and operation.” Setting Procedure 1. Select “LAN mode select” in the Network menu, and press Point 8 or OK button. 2. Select similar LAN environment among LAN1, LAN2 and LAN3 with the Point ed buttons, and press OK button. Then the Menu will disappear, the “Please wait...” message will appear, and switching operation will start. Switching will take a while and the projector’s LINK/ACT Lamp will be on or blink, and after completing the operation, the “Please wait...” message will disappear. Network configuration 3. Select "Network setting" in the Network menu and press OK button, and then the LAN setting screen will appear and selected LAN settings will be displayed. Adjust each item to the setting environment. Consult your system administrator about the detailed settings. Press OK button in a row where you want to adjust, and adjust the figures with the Point ed buttons and move among the items with the Point 7 8 buttons, and then press OK button to fix. Move to the next row with the Point ed buttons to adjust. 4. After completing all the settings, select “Set” and press OK button. Now, all procedures have been done. To cancel the adjusted settings, select "Cancel" and press OK button. You can confirm the LAN settings you have made from “Network information” (p.14). In such cases that the LAN cannot be connected, see this screen. Network setting DHCP: Off DHCP: On * The numerical value is a setting example. Item Description DHCP..................... Sets DHCP function On or Off. When you setup the network setting manually, select "Off". When it is set On, IP address, Subnet, Gateway and DNS are automatically set according to your network environment *1. IP address..............Sets IP address of the projector Subnet.....................Sets Subnet mask according to your network environment. Gateway*2..............Sets IP address of the default gateway (Router) DNS*3........................ Sets IP address of the DNS server. *1 Set "On" only when the DHCP server is available on your network environment. *2 Set [255.255.255.255] if the network does not provide the gateway (router). *3 Set [255.255.255.255] if you do not use the function E-mail alert. Network PIN code The Network PIN code is to restrict the access to the projector through the network. After setting the Network PIN code, you need to enter it to operate the projector via the networks. 1. Select "Network PIN code" in the Network menu, and press OK button. The Network PIN code screen will appear. 2. Set the Network PIN code. Set the figures with the Point ed buttons and move to the next items with the Point 7 8 buttons. Select “Set” and press OK button to set. To cancel the preset Network PIN code, select “Cancel”. When you do not want to set the Network PIN code, set "0000". It is recommended to set the Network PIN code if you use the projector via the networks. The Network PIN code can be set also through the networks. See “3. Basic setting and operation” . “Initial setting” . “Network PIN code setting” (p.23). Network PIN code Network PIN code screen Network information Select "Network information" in the Network menu and press Point 8 or OK button to show LAN setting environment of the currently selected projector. (The description below is an example and different from what will be shown.) * The numerical value is a setting example. Network factory default Network factory default 1. Select “Network factory default” in the Network menu and press OK button. 2. A confirmation box appears and select "Yes" and then press OK button. 3. Another confirmation box appears and select "Yes" and then press OK button. 4. All the wired LAN settings will go back to the factory default settings. For details, refer to “Wired LAN ...
Este manual também é adequado para os modelos :Projetores - LV-7290 (4.56 mb)
Projetores - LV-7295 (4.56 mb)
Projetores - LV-8225 (4.56 mb)