Assessments - 5, GPA: 3.8
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• When the password input dialog box first appears, all of its input positions are blank, and the cursor is flashing at the first (leftmost) input position. • The cursor is used to select an input position for input. • You can perform any one of the 20 remote controller key operations shown below when inputting a password. [AF/AK], [PAGEUP], [PAGEDOWN], [MENU], [KEYSTONE], [D-ZOOM +], [D-ZOOM –], [RGB], [VIDEO], [S-VIDEO], [AUTO], [P-IN-P], [MUTE], [FREEZE], [VOL +], [VOL –], [..], [..], [..], [..] • Each time you perform a remote controller key operation, “..” appears at the current input position, and the cursor moves to the next input position to the right. • A password can be from one to eight key operations long. • After performing all of the key operations you want, press the [ENTER] key. 96 Using the Setup Menu To display the power on password setting screen 1. Perform steps 1 through 4 under “Basic Setup Menu Operations” on page 68. Select the “Option Settings1” main menu, and then select the “Power On Password” sub-menu item. 2. Press the [ENTER] key. • This displays a password input dialog box like the one shown below. 3. Input the current password. • For information about how to input the password, see “Using the Password Input Dialog Box”. 4. Press the [ENTER] key. • If the password you input does not match the currently registered password, the message “The password you input is wrong”. appears. Press the [ESC] key to return to step 1. • If the password you input matches the registered password, pressing [ENTER] above displays the power on password setting screen. To turn the power on password on and off 1. Display the power on password setting screen. • See “To display the power on password setting screen” on page 97. 97 Using the Setup Menu 2. Use the [..] and [..] keys to select “Power On Password”, if you want. 3. Use the [..] and [..] keys to turn the power on password on or off. • Changing the power on password setting causes the message like the one shown below to appear. • Press the [ENTER] key to change the setting. If you do not want to change the setting, press the [ESC] key. To change the power on password 1. Display the power on password setting screen. • See “To display the power on password setting screen” on page 97. 2. Use the [..] and [..] keys to select “Change Password”. 3. Press the [ENTER] key. • This displays the new password input dialog. 98 Using the Setup Menu 4. Input the new password, and then press the [ENTER] key. • This displays a dialog box for re-inputting the password for confirmation. 5. Re-input the same password you input in step 4, and then press [ENTER]. • If the two passwords you input were identical, the message “Your new password has been registered.” appears. Press the [ESC] key. • If the password you input here is different from the one you input in step 4 the message “The two passwords you input are different.” appears. Press the [ESC] key to return to step 1. Option Settings1 .. Custom Logo Settings With this sub-menu, you can cut part of the projected screen and use it to create an original logo, which you can display for the startup screen, the no signal screen, and the mute screen. An original logo that you create is called a “custom logo”. The custom logo settings let you create a custom logo, view your custom logo, and perform other operations. • Custom logo settings cannot be configured when there is no input signal. • A single custom logo is stored, which is applied to all input sources. Capturing a Custom Logo Image You can create a custom logo by capturing part of an image that is currently being projected by the projector. • The display size and position of a custom logo created by capturing an image depend on the configuration of the following settings when you capture the image: Logo Vertical, Logo Horizontal, Custom Logo Zoom, Background Color, and Resolution. Make sure that you configure these settings the way you want before performing the image capture operation. For details of these operations, see “Configuring Custom Logo Capture Settings” on page 102. 99 Using the Setup Menu To capture a custom logo 1. Project the still image that you want to use as the custom logo. 2. Perform steps 1 through 4 under “Basic Setup Menu Operations” on page 68. Select the “Option Settings1” main menu, and then select the “Custom Logo Settings” sub-menu item. 3. Press the [ENTER] key. • This displays the custom logo settings screen. 4. Use the [..] and [..] keys to select “Start Capture”, and then press the [ENTER] key. • This causes a cross cursor to appear in the projected image. Cross cursor 5. Use the cursor keys to move the cross cursor to the location where you want the upper left corner of the selection boundary to be. 6. Press the [ENTER] key. • This fixes the current cross cursor location as the upper left corner of the selection boundary. 100 Using the Setup Menu 7. Use the cursor keys to move the cross cursor and draw the selection boundary...