Log:
Assessments - 2, GPA: 5 ( )

Instruções de Operação Casio, Modelo A240

Fabricante : Casio
Arquivo Tamanho: 5.99 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Up to 24 single-byte alphanumeric characters can be entered. Initial Default: casiolpj_default1 (casiolpj_default2 and casiolpj_default3 also are built into the projector.) SSID Broadcast Specifies whether SSID information broadcasting is enabled or disabled. Initial Default: Enable Channel Specifies the channel used for wireless LAN communication. Selecting “Auto” causes auto selection of a channel that is appropriate for the current communication environment. To specify a channel number, select channel number 1 through 11 from the list that appears when you click the [.] button to the right of the channel number. Initial Default: Auto Security Specifies the security protocol. For more information, see “To configure security settings” (page 21). Initial Default: WPA-PSK AES Passphrase/WEP Key Specifies the passphrase or WEP key in accordance with the security protocol selected with “Security” above. For more information, see “To configure security settings” (page 21). IEEE 802.11n Specifies whether wireless LAN standard IEEE 802.11n is enabled. Initial Default: Enable Channel Width Specifies either “20MHz” or “Auto” for the IEEE 802.11n channel width. Initial Default: 20MHz Show User Name Display Specifies whether the computer’s user name should appear on the projection screen when projection starts from a computer connected to the projector via wireless LAN. Initial Default: On (User name displayed.) 36 System Admin > Change Password Setting Name Description New Password Reinput password For input of the new password when logging in to the System Admin page. Initial Default: admin 37 Appendix Appendix Using the Token Wizard You can use the Wireless Connection 3 token wizard to copy Wireless Connection 3 to USB memory. After you do that, you can run Wireless Connection 3 on a computer that does not have the program installed simply by plugging the USB memory (called a “USB Token”) into the computer’s USB port. Using USB tokens is recommended when connecting to the projector from multiple computers. Installing Wireless Connection 3 on USB Memory USB memory with a capacity of at least 4MB is required for installation. Use of newly formatted USB memory that does not contain any other data is recommended. Important! Using the procedure below to install Wireless Connection 3 on USB memory creates a file named “autorun.inf” (which is a Wireless Connection 3 auto run file) in the USB memory root directory. If the USB memory root directory already contains a file with the same name, the existing file will be renamed by adding “.bak” or a three-digit number (.001, .002., etc.) to the end of its file name. To install Wireless Connection 3 on USB memory Note Using the following procedure to install Wireless Connection 3 on USB memory will change the name of the USB memory to “USB Token” and also change its icon to . 38 1. On a Wireless Connection 3 window, click the function menu button and then click [Token Wizard] on the menu that appears. • This displays the token wizard. 2. Click [Next>]. • This displays a USB drive selection screen. • If there is no USB memory connected to the computer, the message “USB memory could not be detected.” will appear. If this happens, connect the USB memory and wait until its USB memory drive name appears in the “USB Drive” box. 3. If there are multiple USB memories connected to the computer, click the [.] button to the right of the “USB Drive” box and select the name of the drive where you want to install Wireless Connection 3. 4. Click the [Next>] button. • This installs Wireless Connection 3 on the specified USB memory. The message “Wizard ended normally.” appears on the display after installation is complete. 5. Click [Exit] to close the token wizard screen. To use a USB token to connect a computer to the projector via wireless LAN Connect the USB token to the computer’s USB port and then double click the Wireless Connection 3 icon in the token. After Wireless Connection 3 starts up, you can perform the same operations you do when Wireless Connection 3 is installed on a computer. Note • The user name and passphrase (or WEP key) is not remembered when you start up Wireless Connection 3 from a USB token. • You cannot use the token wizard when you start up Wireless Connection 3 from a USB token. 39 Installing and Removing the Wireless Adapter The projectors come with wireless adapters YW-3 (either built-in or supplied separately). You can install and remove the wireless adapter as required. *Caution Keep the wireless adapter that comes with the projector out of the reach of small children. Accidental swallowing of the product can interfere with proper breathing and create a life-threatening situation. Important! • Keep the wireless adapter in a safe place when it is not installed on the projector. • Never try to use the wireless adapter that comes with the projector with any other type of device. • Never try to connect any other type of device to the special YW-3 port located under ...

Este manual também é adequado para os modelos :
Projetores - XJ-A130 (5.99 mb)
Projetores - A135 (5.99 mb)
Projetores - A140 (5.99 mb)
Projetores - A145 (5.99 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias