Assessments - 2, GPA: 4 ( )

Fabricante : Casio Arquivo Tamanho: 10.84 mb Arquivo Nome : Língua de Ensino:

• You can use the EZ-Converter FA software that comes with the projector to convert PowerPoint files to PtG files that can be played back using MobiShow. Also, you can play PtG files using the projector’s Viewer function. For more information, see the “USB Function Guide” on the CD-ROM that comes with the projector. Confirmed MobiShow Platforms Visit the CASIO projector support page at: Wireless Projection from Mac OS You can project the screen contents of a computer running Mac OS (Mac OS X 10.5 or higher) that is connected to the Projector over a wireless LAN connection. The following conditions are required in order to do so. • The SSID of the Projector must be changed to any one of the following: casiolpj_mobishow1, casiolpj_mobishow2, or casiolpj_mobishow3. See “To switch between default SSIDs” on page 30 for information about how to change the SSID. • Install wePresent* on the Mac OS computer, start it up, and then log in to the Projector from wePresent. * You can download wePresent from the CASIO Projector Support Site located at the URL shown below. The CASIO Projector Support Site also includes important information about the required computer environment and operation details. D 42 Wireless LAN Connection Troubleshooting Check the following points whenever you are having problems with a wireless LAN connection. Wireless LAN Connection between the Projector and a Computer Problem Cause and Required Action [Reconnect] remains on the Wireless Connection 3 window and the computer won’t connect to the projector. • If any other wireless LAN utility besides Wireless Connection 3 is running on the computer, close it. • If the projector and computer are far away from each other or if there is a wall or some other physical impediment between them, move them closer and/or remove the impediment. • If a nearby microwave oven, Bluetooth device, or other device is interfering with the wireless LAN signal, relocate the interfering device. • If the projector is off, turn it on. • If the projector does not have its wireless adapter connected, connect it (page 12). • If the computer’s wireless LAN function is disabled, enable it. • Check to make sure that the computer’s wireless LAN function (built-in or external wireless adapter) satisfies the required “Wireless LAN” conditions under “Minimum System Requirements” (page 9). Connection will not be possible if these conditions are not satisfied. The wireless LAN • If any other wireless LAN utility besides Wireless Connection 3 is running on the connection between the computer, close it. projector and computer • If the projector and computer are far away from each other or if there is a wall or keeps dropping. some other physical impediment between them, move them closer and/or remove the impediment. • If a nearby microwave oven, Bluetooth device, or other device is interfering with the wireless LAN signal, relocate the interfering device. Problem Cause and Required Action Refer to: I can establish a wireless • On the projector, press the [INPUT] key and make sure “To perform wireless LAN connection between that “USB” is selected as the input source. projection” (page 13) the projector and computer, but the • If computer display contents won’t project while “USB” is selected as the input source, click the “Starting and Stopping Projection from a Computer computer screen contents won’t project from the projector. button on the computer’s Wireless Connection 3 window. • If the projection image has been frozen or cut off by pressing the [FREEZE] or [BLANK] key on the projector, press the [ESC] key to cancel the freeze/ blank operation. Connected via Wireless LAN Connection” (page 26) User’s Guide (UsersGuide_English.pdf) Projection image • Check what is selected for the projector’s “Projection “To select display speed switching is slow. Setting” item. If “High-resolution” is selected, change the setting to “High-speed”. • If your computer is running Windows Vista or Windows 7, disable Windows AeroTM. priority or resolution priority for projection” (page 28) The user name does not • Make sure that “On” is selected for the “Show User “To configure projector’s appear when I start Name Display” item on the System Admin page network settings and projecting from a “Setup” screen. wireless LAN connection computer. settings” (page 35) How can I check the projector’s SSID and login code? • Check the Wireless standby screen. “To perform wireless projection” (page 13) B 43 Simultaneous Wireless LAN Connections with Multiple Projectors Problem Cause and Required Action Refer to: Wireless Connection 3 is • Make sure all of the projectors are turned on. A – running on my computer, projector can be recognized by a computer even if but the Projector List “USB” is not selected as the projector’s input source. dialog box won’t display. • Make sure that all of the projectors have wireless adapters connected (page 12). • If the proj...

Baixe o seu

Para fazer o download, introduza 2 dígitos :