Assessments - 3, GPA: 3.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
The password function will not be activated if the power backed on while it is standby mode without turning off the main power switch. 1 How to set password (from [On] to [Off]) Select [Password] in the [Setting 2] menu and press Enter. The password entry screen is displayed. 2 Enter the password using the arrow keys of the remote control. 3 Select [Off] and press Enter to disable the password. Operations Note • Please do not forget your password. If you forget the password, you can not release the password by yourself. • In such a case, please contact your dealer. 44 45 Menu tree Top menu InputInput Adjust Computer1 Volume Setting Status display Computer2 Computer3 Y/PB/PR Video S-Video Adjust Image adjustment Display setting Advanced Setting Setting 1 Setting 2 Setting 3 Status display Usage Time Input Network Version Reset Current signal All data Clear lamp1 time Clear lamp2 time Clear filter time 0~61 Adjust Setting 1 Gamma Color temp BrilliantColor Dynamic/Natural/Black Detail 5000K/6500K/7800K/8500K /9300K/10500K 1~3 White balance R-level G-level B-level 0~100 0~100 Image Adjustment Picture mode Detail settings Contrast Brightness Sarpness Color Tint Bright/Presentation/Video/Cinema/Photographic/sRGB Setting 1/White balance/Color correction 0~100 0~100 0~31 0~100 0~100 Reset Display setting Screen Overscan Position adjustment H-position V-position Frequency Phase 4:3/16:9/16:10/Letterbox/True/Standard 93%/95%/97%/100% +\- 50 +\- 25 +\- 50 0~63 Mode priority Wide/4:3 Advanced Noise reduction 3D Y/C separation Progressive Color matrix Off/Low/Mid/High Off/On Off/Still/Standard/Cinema Auto/RGB/SDTV/HDTV Off/2-2/2-3 Auto/2-2/2-3 Film 0~100 Color correction Yellow Magenta Cyan -60~60 -60~60 -60~60 Operations 46 47 Menu tree (Continued) SettingSetting 1KeystoneLamp powerLamp modeLamp intervalLanguageLens ShiftZoomH-keystone (-100~100) V-keystone (-100~100) Low/Standard* Dual*/Lamp1/Lamp2Off*/1 week/4 week/2000HEnglish/Deutsch/Francais/Italiano/Espanol/ Svenska/ FocusNetworksettingDHCPIPaddressSubnetGatewayDNSEnable*/DisableApply settingsProjection modeDisplay timeBackgroundPasswordKey lockDynamicBlackRC sensorStandard*/Rear ceiling/ Rear/CeilingContinuous/5 sec/15 sec/ 45 sec* Off*/OnBlue/None*/LogoOff*/OnOff*/OnBoth*/Front/BackNetwork settingStandby modeStandard*/Power-savingPC controlPC control*/NetworkSetting 3Power onNo signal power offScreen triggerFAN modeManual/AutoOff*/5 min/10 min/20min/30 minOff*/OnStandard*/HighDefault input selectLast source*/Auto/Computer1/Computer2/Computer3/Y/PB/PR/Video/S-VideoVideo modeVideoAuto*/NTSC/PAL/SECAMS-VideoAuto*/NTSC/PAL/SECAMMessageOff/On* Filter warningOff/100[H]/200[H]/500[H]*/1000[H] Standard*/FineSearch modeSetting 2 Status display Version Model name Firmware Usage time Lamp1 Lamp2 Lamp1 time Lamp2 time PJ time Filter time Network IP address Subnet Gateway MAC address Input Input name Signal H-sync. freq V-sync. freq Video mode Sync Sync polarity Scan type Operations 48 49 Using the Adjust menus The Adjust menu contains overall projector settings for image output such as sharpness, overscan The Setting 1 menu and color matrix. Three tabs are accessible through the Adjust menu; Image adjustment, Display setting, and Advanced. Items that can be set or adjusted are marked “Yes”, and those that cannot are marked “No”. (When an item is masked, it indicates that you cannot select for the current input). • The Image adjustment menu Item • • Picture mode Description Computer 1 Press and toggle the picture mode with • q. Bright/Presentation/Video/ Cinema/Photographic/sRGB Yes Computer 2 Yes Computer 3 Yes Y/PB/PR Yes Video Yes S-video Yes Contrast Adjust the image contrast. Lower • uHigher Yes Yes Yes Yes Yes Yes Brightness Adjust the brightness of the image. Darker • uLighter Yes Yes Yes Yes Yes Yes Sharpness Adjust the sharpness of the image. Softer • uSharper Yes Yes Yes Yes Yes No Color Adjust the color of the image. Lighter • uDeeper No No No Yes Yes No Tint*1 Adjust the tint of the image color. Reddish • uGreenish No No No Yes Yes No *1: Tint can be displayed and adjusted only when the video signal is set to [NTSC] or [Auto]. Item • • Description Bright Presenatation Video Cinema Photographic sRGB Gamma Press and toggle the Gamma level with • q. Dynamic/Natural/Black detail Yes Yes Yes Yes Yes Yes Color temp. Adjust the Color temp. Lower • uHigher No No Yes Yes Yes Yes BrilliantColor Adjust the BrilliantColor value. Lower • uHigher No No Yes Yes Yes Yes The White balance menu Item • • Description Bright Presenatation Video Cinema Photographic sRGB R-level Adjust the R-level. Lower • u Higher Yes Yes Yes Yes Yes Yes G-level Adjust the G-level. Lower • u Higher Yes Yes Yes Yes Yes Yes B-level Adjust the B-level. Lower • u Higher Yes Yes Yes Yes Yes Yes Operations 50 51 Using the Adjust menus (Continued) The Color correction menu • The Display setting menu Item • • Description Bright Presenatation Video Cinema Photographic sRGB Yellow Adjust the Y level. Lower • u...
Este manual também é adequado para os modelos :Projetores - TDP-WX5400U (5.43 mb)