Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
Viewing the manual Run the CD-ROM and double-click on Start.pdf. Acrobat® Reader® launches, and the menu screen of the Owner’s manual appears. Click on your language. The Owner’s Manual cover and list of bookmarks appear. Click on a bookmark title to view that section of the manual. Click on p. to view a reference page with related information. See the Help menu for more information about Acrobat® Reader®. 16 Names of each part on the main unit (2) (4) (3) (1) (6) (7) (5) (12) (13) (14) (15) (10) (9) (5) (8) (11) Back Front Name : Function (1) Lens : Projects expanded image. (2) Infrared remote sensor : Senses commands from the remote control.p.20 (3) Foot adjuster release button : Press to set up or stow the foot adjuster. p.27 (4) Air exhaust : Expels air that has grown hot inside the projector. (5) Air intake : Draws in air from outside the projector for internal cool down. (6) Control panel : Operates the projector. p.17 (7) Zooming ring : Adjusts screen size. p.27 (8) Speaker : Outputs audio sound. (9) AC IN socket : Connect the supplied power cord here. (10) Rear panel : Connects external devices. p.19 (11) Antitheft lock slot : Attach a safety cable or any other antitheft device. (12) Tilt adjuster : Adjusts the projector’s horizontal tilt. p.27 (13) Lamp cover : Remove to replace lamp. p.37 (14) Foot adjuster : Adjusts the vertical projection angle. p.27 (15) Focusing ring : Adjusts screen focus. p.27 Names of each part on the control panel (3) (1) (2) (1) (8) (9) (5) (6) (4) (7) Name : Main Function Control panel (1) VOL +/- button : Adjusts the volume. (2) ENTER button : Accepts the selected mode. (3) KEYSTONE +/- button : Adjusts keystone distortion. p.28 (4) Selection buttons : Menu selections and adjustments. p.31 (5) INPUT button : Selects input source. p.26 (6) ON/STANDBY button/ : Turns the power on/off (standby). p.24 indicator : Displays power on/off mode. p.24 (7) MENU button : Displays menus. p.31 (8) TEMP indicator : Lights when internal temperature is too high. p.40 (9) LAMP indicator : Displays lamp mode. p.40 Names of each part on the remote control Remote control transmitter (5) (6) (3) (7) (4) (2) (1) (1) (3) (10) (9) (11) (9) (8) Name : Main Function (1) VOL +/- button : Adjusts the volume. (2) ENTER button : Accepts the selected mode. (3) KEYSTONE +/- button : Adjusts keystone distortion. p.28 (4) Selection buttons : Menu selections and adjustments. p.31 (5) INPUT button : Selects input source. p.26 (6) ON/STANDBY button : Turns the power on/off (standby). p.24 (7) MENU button : Displays menus. p.31 (8) FREEZE button : Pauses image. p.29 (9) RESIZE buttons : Enlarges images. p.30 (10) Auto-Set button : Performs auto-adjustment of input signals from computer. p.28 (11) MUTE button : Cuts off the picture and sound temporarily. p.29 Parts on the rear panel (7) (1) (5) (2) (3) (4) (6) (8) (9) Name : Main Function (1) COMPUTER IN terminal : Input analog RGB signal from a computer or other source, or a component video signal (Y/PB/PR) from video equipment. (2) S-VIDEO terminal : Input S video signals from video equipment. (3) VIDEO terminal : Input video signals from video equipment. (4) AUDIO IN terminal : Input audio signals. (5) AUDIO OUT terminal : Outputs audio signals. (6) MONITOR terminal : Connect to a computer display, etc. (7) CONTROL terminal : When operating the projector via a computer, connect this to the controlling computer’s RS-232C port. p.45 (8) AC IN socket : Connect the supplied power cord here. (9) Antitheft lock slot : Attach a safety cable or any other antitheft device. Preparing and using the remote control ¦ Loading a coin cell battery into the remote control j Remove the battery holder. Hold down the side release firmly and pull out the battery holder. k Load a coin cell battery (CR2025). Be sure to align the plus and minus ends of the battery properly. 3VOLTSCR2025 l Replace the battery holder back into the remote control. M3VOLTSCR2025 Notes • When you use for the first time after purchase, a plastic sheet is provided between the battery and its contact. Be sure to remove by pulling it off. • When operating the remote control from behind the projector, the signal beam is reflected on the projecting surface and may travel a shorter distance to reach the projector depending on the shape and material of the projecting surface. ¦ Operating the remote control Point toward the projector’s infrared remote sensor, and press a button on the remote control. • Operating the projector from the front Approx. 7mApprox.15 Coin cell battery • Before using the battery, be sure to observe the Safety Precautions described in previous pages. • Remove the battery from remote control when not using for extended periods. • If the remote control stops working, or if its range decreases, replace the battery with a new one. • Keep the battery away from the reach of children. Battery is choking hazard and can be very dangerous if swallowed. If the battery is swallowed, seek medical a...
Este manual também é adequado para os modelos :Projetores - TDP-SP1U (2.72 mb)