Assessments - 3, GPA: 3.3 ( )

Fabricante : Toshiba Arquivo Tamanho: 1.72 mb Arquivo Nome : Língua de Ensino:

Problem with projector • Unplug the power cord, and (Red lit) (Red lit) ONLAMPTEMPFAN Lamp went out during use, come on . Lamp temperature is high so that it is to turn on, the lifetime of the lamp has ended or the projector is • Unplug the power cord and wait for a short back on. • If a lamp burns out, replace it with a new one. . After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. ONLAMPTEMPFAN Power went out during use (Green lit) (Red lit) (Red lit) . Internal overheating, or the outside temperature is too high. • Place the projector so that the air intake and exhaust are not blocked. Or Or • Unplug the power cord and wait for a short while, then turn the power (Off) (Orange lit) back on. Or • Clean the air filter. p.39 (Green lit) . The icon will appear before the power goes out. . After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. ONLAMPTEMPFAN Power went out during use (Red lit or flashing) (Red lit) . Problem with internal cooling fan. • Unplug the power cord, and contact your dealer. . The icon will appear before the power goes out. Or (Orange lit or flashing) . After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. (Orange flashing) (Red lit) ONLAMPTEMPFAN Power went out during use, or power won’t come on . The lamp cover is not properly attached. • Unplug the power cord, and reattach the lamp cover. p.41 . After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. Model with a Power went out during use document . Camera is not correctly connected. camera • Disconnect the power plug and check the connection with the camera. ONLAMPTEMPFAN . The icon will appear before the power goes out. . After approx. one minute of abnormal display, the projector returns to (Green lit) (Red lit) the standby state waiting for internal cool down. PRECAUTIONS • Make sure to unplug the power cord if something goes wrong. • If the power cord is unplugged before cooling is complete, give the lamp enough time to cool before plugging it back in. If the lamp overheats, it may fail to light. Unplugging the power cord repeatedly when the temperature is high will shorten the life of the lamp. (Even if you are not concerned about lamp lifetime, the light may not come on if you do not wait at least 3 minutes.) 42 Before If you think something Please see “ Trouble indications” p.42 as well. If This Happens Check No power • Is the power cord plugged • Is the lamp cover loose? p.42 Power goes out during use • Is the ambient temperature high? p.42 • Is the air filter clogged? p.42 • Is the air intake or air exhaust blocked? p.42 No picture • Is the projector turned on? p.24 • Is the mute function on? p.28 • Is the brightness setting minimized? p.32 • Are the connections set up correctly? p.21 • Are al...

Baixe o seu

Para fazer o download, introduza 2 dígitos :