Assessments - 3, GPA: 3.7
(
)
)
|
por este dispositivo também tem outras instruções :
Projetores - XJ-H2650 (19.47 kb)
Projetores - XJ-H2650 (18.79 kb)
Projetores - XJ-H2650 (18.85 kb)
Facilidade de uso
The following items are required for installation: SD/MMC memory card with at least 5MB of free space, and the USB cable and USB cradle that come with the camera. • If you do not have an SD/MMC memory card or if you do not have the update software on hand for some reason, contact your nearest CASIO service center and request installation from them. Note that if you do request installation, you will need to leave your camera at the CASIO service center for a few days. 2 To prepare firmware you downloaded from the CASIO website 1. Visit the CASIO website below and download “YC-400 Firmware Update Software ver.1.1” to your computer. 2. Double-click the file you downloaded and then follow the instructions that appear on your computer screen. When you click [OK] on the dialog box for specifying the file extraction destination, the file will self-extract and create a file named “YC-400.bin” in the folder you specify. 3. Next, perform the procedure under “To install the update software on your camera”. To prepare firmware on the CD-ROM (that comes with some projector models) 1. Place the CD-ROM that comes with the projector into your computer’s CD-ROM drive. 2. On the menu screen that appears, click the [Open Folder] button to the right of “Multi Projection Camera Update Software”. 3. In the folder that opens, double-click the file named “YC-400.exe” and then follow the instructions that appear on your computer screen. When you click [OK] on the dialog box for specifying the file extraction destination, the file will self-extract and create a file named “YC-400.bin” in the folder you specify. 4. Next, perform the procedure under “To install the update software on your camera”. To install the update software on your camera 1. Connect the AC adaptor to the camera or load a fully charged battery into the camera. Next, load a memory card into the camera. 2. Place the camera onto its USB cradle and establish a USB connection with your computer. Next, copy the extracted file (YC-400.bin) to the root directory (the top directory on the drive) of the memory card. 3. After the copy operation is complete, remove the camera from the USB cradle. 4. On the camera, hold down the [MENU] button as you press the [ON/OFF] (Power) button to turn on power. Keep the [MENU] button depressed until the message “PROGRAM UPDATE” appears on the monitor screen. 5. On the “PROGRAM UPDATE” screen, move the highlighting from [NO] to [YES] by pressing [e]. Next, press the [SET] button. 3 6. This starts installation of the update software, which is indicated by the message “NOW LOADING” on the camera monitor screen. The message “COMPLETE” appears when installation is complete. 7. After installation is complete, turn off the camera. 8. Perform the operation under “To check your firmware version” to confirm that the camera is now running the new firmware version. 9. After confirming that the update was performed successfully, delete the YC-400.bin file from both the memory card and your computer. 4 ...
Este manual também é adequado para os modelos :Projetores - XJ-H2600 (6.27 mb)