Assessments - 5, GPA: 4
(
)
)
|
Fotos e especificações Sony VPL-CX86 |
por este dispositivo também tem outras instruções :
Facilidade de uso
Set according to the input signal The INPUT SETTING Menu Setting items Functions Initial setting Shift Adjusts the position of the picture. H adjusts the horizontal position of the picture.V adjusts the vertical position of the picture. As the setting for H increases, the picture moves to the right, and as the setting decreases, the picture moves to the left. As the setting for V increases, the picture moves up, and as the setting decreases, the picture moves down. Use the < or the , key to adjust the horizontal position and the M and m key for the vertical position. Set according to the input signal Scan Converter Converts the signal to display the picture according to the screen size. When set to “Off,” displays the picture while matching one pixel of input picture element to that of the LCD. The picture will be clear but the picture size will be smaller. On Note Note that if the projector is used for profit or for public viewing, modifying the original picture by switching to the wide mode may constitute an infringement of the rights of authors or producers, which are legally protected. About the Preset Memory No. This projector has 45 types of preset data for input signals (the preset memory). When a preset signal is input, the projector automatically detects the signal type and recalls the data for the signal from the preset memory to adjust it to an optimum picture. The memory number and signal type of that signal are displayed on the INFORMATION menu (See page 35). You can also adjust the preset data through the INPUT SETTING menu. This projector has 20 types of user memories for Input-A into which you can save the setting of the adjusted data for an unpreset input signal. When an unpreset signal is input for the first time, a memory number is displayed as 0. When you adjust the data of the signal using the INPUT SETTING menu, it will be registered in the projector. If more than 20 user memory items are registered, the newest memory always overwrites the oldest one. See the chart on page 48 to find if the signal is registered in the preset memory. Since the data for the following signals is recalled from the preset memory, you can use these preset data items by adjusting “H Size.” Make finer adjustments by adjusting “Shift.” Signal Memory No. SIZE Super Mac-2 23 1312 SGI-1 23 1320 Macintosh 19" 25 1328 Macintosh 21" 27 1456 Sony News 36 1708 PC-9821 1280 . 1024 36 1600 WS Sunmicro 37 1664 Note When the aspect ratio of input signal is other than 4:3, a part of the screen is displayed in black. Adjustments and Settings Using a Menu The INPUT SETTING Menu The SET SETTING Menu The SET SETTING menu is used for changing the settings of the projector. Setting items Functions Initial setting Smart APA The APA (Auto Pixel Alignment) automatically adjusts “Dot Phase,” “H Size” and “Shift” on the INPUT SETTING menu for the input signal from a computer. • On: When a signal is input from a computer, the APA functions automatically so that the picture can be seen clearly. Once the specified input signal has been adjusted by the “Smart APA,” it will not be readjusted even when the cable is disconnected and connected again or the input channel is changed. You can adjust the picture by pressing the APA key on the Remote Commander even if “Smart APA” set to “On.” • Off: The APA functions when you press the APA key on the Remote Commander. On Auto Input Search When set to “On,” the projector detects input signals in the following order: Input-A/Input-B/Input-C (VPLCX86 only) /Video/S-Video. It indicates the input channel when the power is turned on (only when “startup” in “Memory Stick” Home is set to “Off” (VPL-CX86 only)) or the INPUT key is pressed. Off Input-A Signal Sel. Selects the “Computer,” “Component,” or “Video GBR” signal input via the INPUT A connector. Computer Input-C Select (VPL-CX86 only) Select “Air Shot” or “Memory Stick” as the input source that you want to project via Input-C. Air Shot Color System Selects the color system of the input signal. If you select “Auto,” the projector detects the color system of the input signal automatically. If the picture is distorted or colorless, select the color system according to the input signal. When the color system of the input signal is PAL60, select “PAL.” If “Auto” is selected, the color system cannot be detected. Auto Speaker Set to “Off” to cut off the sound of the internal speakers. When set to “Off,” “Speaker:Off” appears on the screen when you turn on the power. On The SET SETTING Menu Setting items Functions Initial setting Standby Mode You can lower the power consumption in standby mode. • Standard: Normally, select this position when you use the Air Shot even in standby mode. • Low: Select this position when you do not use the Air Shot, and want to lower the power consumption in standby mode. Standard Power Saving When set to “On,” the projector goes into power saving mode if no signal is input for 10 minutes. Although the lamp goes out, the coolin...
Este manual também é adequado para os modelos :Projetores - VPL-CX80 (1.36 mb)