Assessments - 2, GPA: 3
(
)
)
|
Fotos e especificações Sony VPL-CX20 |
Facilidade de uso
SIZE Super Mac-2 37 1312 SGI-1 37 1320 Macintosh 19" 39 1328 Macintosh 21" 41 1456 Sony News 47 1708 PC-9821 1280 . 1024 47 1600 WS Sunmicro 48 1664 Note When the aspect ratio of input signal is other than 4:3, a part of the screen is displayed in black. 24 The Signal Menu The Function Menu The Function menu is used for changing the settings of the projector. Setting items Functions Initial setting Smart APA The APA (Auto Pixel Alignment) automatically adjusts “Dot Phase,” “H Size” and “Shift” on the Signal menu for the input signal from a computer. • On: When a signal is input from a computer, the APA functions automatically so that the picture can be seen clearly. Once the specified input signal has been adjusted by the “Smart APA,” it will not be readjusted even when the cable is disconnected and connected again or the input channel is changed. You can adjust the picture by pressing the APA key on the Remote Commander even if “Smart APA” set to “On.” • Off: The APA functions when you press the APA key on the Remote Commander. On Auto Input Search When set to “On,” the projector detects input signals in the following order: Input-A/Video/S-Video. It indicates the input channel when the INPUT key is pressed. Off Auto Focus When set to “Off,” the focus adjustment does not work automatically when the projector is turned on or when the AUTO FOCUS key on the projector or the remote commander is pressed. On Test Pattern When set to “On,” a test pattern is displayed on the screen during “Lens Zoom”, “Lens Focus,” or “V Keystone” adjustment. Off Standby Mode When set to “Low”, the power consumption is set to low in standby mode. Standard Power Saving When set to “On,” the projector goes into power saving mode if no signal is input for 10 minutes. Although the lamp goes out, the cooling fan keeps running. The power saving mode is canceled when a signal is input or any key is pressed. In power saving mode, no keys function for the first 45 seconds after the lamp goes out. Off Adjustments and Settings Using a Menu The Function Menu Setting items Functions Initial setting Panel Key Lock Locks all the control panel keys on the side panel of the projector so that the projector can be operated only with the Remote Commander. To lock the control panel keys, set to “On.” When it is set to “On,” keeping the ?/1 key on the control panel pressed for 10 seconds turns the projector on when it is in standby mode, and turns the projector to standby mode when the power is on. If you press and hold the MENU key for about 10 seconds when the power is on, the lock will be released and “Panel Key Lock” is automatically set to “Off.” Off Security Lock Turns on the projector’s security lock function. When set to “On,” turns on the security lock function, which locks the projector once a password has been set. For details, see “Security Lock” on page 16. Off Notes • Press the APA key when the full image is displayed on the screen. If the projected image includes a black portion around it, the APA function will not work properly and some parts of the image may not be displayed on the screen. • You can cancel the adjustment by pressing the APA key again while “Adjusting” appears on the screen. • The picture may not be adjusted properly depending on the type of input signal. • Adjust the “Dot Phase,” “H Size,” and “Shift” items on the Signal menu when you adjust the picture manually. The Function Menu The Installation Menu The Installation menu is used for changing the settings of the projector. Sel: Set: Exit: Picture Signal Function Setup Installation Information Lamp Mode: Standard Lens Control: On IR Receiver: Front & Rear V Keystone: Auto Background: Blue Illumination: On High Altitude Mode: Off Tilt Setting items Functions Initial setting Tilt... Adjusts the position (height) of the projected picture. V Keystone Corrects the trapezoidal distortion caused by the projection angle. Select “Auto” for automatic correction, or “Manual” for manual correction using the v/V/b/B keys on the Remote Commander. When the bottom of the trapezoid is longer than the top : Sets a lower value. When the top of the trapezoid is longer than the bottom : Sets a higher value. Auto Background Selects the background color of the screen when no signal is input to the projector. Select “Black” or “Blue.” Normally, set to “Blue.” Blue Lamp Mode Sets the lamp brightness used during the projection. • High: Illuminates the projected image brightly. • Standard: Reduces fan noise and power consumption. The brightness of the projected image will be lower compared with the “High” setting. Standard Lens Control When set to “Off,” the LENS (FOCUS, ZOOM) key on the Remote Commander, and the FOCUS and ZOOM keys on the projector do not function. On IR Receiver Selects the remote control detectors (IR Receiver) on the front and rear of the projector. • Front & Rear: Activates both the front and rear detectors. • Front: Activates the front detector only. • Rear: Activates the...
Este manual também é adequado para os modelos :Projetores - VPL-CS20 (906.37 kb)