Assessments - 2, GPA: 4
(
)
)
|
Fotos e especificações Sony VPL-FX52L |
Facilidade de uso
To clear the menu Press the MENU key. The menu disappears automatically if a key is not pressed for one minute. To reset items that have been adjusted Press the RESET key on the Remote Commander. “Complete!” appears on the screen and the settings appearing on the screen are reset to their factory preset values. Items that can be reset are: • “Contrast,” “Brightness,” “Color,” “Hue,” “Sharpness” and “RGB Enhancer” in the Adjust Picture... menu. • “Dot Phase,” “H Size,” and “Shift” in the Adjust Signal... menu. About the memory of the settings The settings are automatically stored in the projector memory. If no signal is input If there is no input signal, “Cannot adjust this item.” appears on the screen. About the menu display You can set the display position of the menu, intensity of the background picture and tone of the menu items as you like. For details, see “The MENU SETTING Menu” on page 35. The PICTURE SETTING Menu The PICTURE SETTING menu is used for adjusting the picture or volume. Items that cannot be adjusted depending on the input signal are not displayed in the menu. For details on the unadjustable items, see page 52. Picture Mode Standard Adjust Picture... PICTURE SETTING Input A Menu Items Picture Mode Selects the picture mode. Dynamic: Emphasizes the contrast to produce a “dynamic” picture. Standard: Normally select this setting. If the picture has roughness with the “Dynamic” setting, this setting reduces the roughness. Adjust Picture... Menu Items The unit can store the setting values of the following sub menu items for each “Dynamic” or “Standard” picture mode separately. The PICTURE SETTING Menu Adjust Picture... When the video signal is input PICTURE SETTING Contrast: 80 Brightness: 50 Color: 50 Hue: 50 Sharpness: 50 Black Level Adj.: Off Color Temp.: Low DDE: Film Video ADJUST PICTURE Standard When the RGB signal is input PICTURE SETTING Contrast: 80 Brightness: 50 RGB Enhancer: 30 Gamma Mode: Graphics Color Temp.: High Input A ADJUST PICTURE Standard Contrast Adjusts the picture contrast. The higher the setting, the greater the contrast between a dark portion and a bright portion of the picture. The lower the setting, the lower the contrast. Brightness Adjusts the picture brightness. The higher the setting, the brighter the picture. The lower the setting, the darker the picture. Color Adjusts color intensity. The higher the setting, the greater the intensity. The lower the setting, the lower the intensity. Hue Adjusts color tones. The higher the setting, the picture becomes greenish. The lower the setting, the picture becomes purplish. Sharpness Adjusts the picture sharpness. The higher the setting, the sharper the image. The lower the setting, the softer the image. RGB Enhancer Adjusts the picture sharpness when RGB signals are input. The higher the setting, the sharper the picture. The lower the setting, the softer the picture. Black Level Adj. Using black level adjustment results in a vivid image with clearly defined light and dark areas. Set the black compensation in accordance with the image source. High: Strong black compensation Low: Weak black compensation Off: No black compensation Gamma Mode Selects a gamma correction curve. Graphics: Improves the reproduction of halftones. Photos can be reproduced in natural tones. Text: Contrasts black and white. Suitable for images that contain lots of text. Color Temp. Adjusts the color temperature. High: Makes the white color bluish. Low: Makes the white color reddish. Adjustments and Settings Using the Menu The PICTURE SETTING Menu 31 DDE (Dynamic Detail Enhancer) Selects the reproduction format of the input video signals according to the video sources. Off: Plays back the video signal in an interlace format without converting. Progressive: Converts an interlace format video signal to a progressive format. Film: Reproduces the 2-2, 2-3 Pull-Down film sources with smooth picture movement. When the video signal with a format other than the 2-2, 2-3 Pull- Down is input, “Progressive” is automatically selected. The INPUT SETTING Menu The INPUT SETTING menu is used to adjust the input signal. Items that cannot be adjusted depending on the input signal are not displayed in the menu. For details on the unadjustable items, see page 52. When the video signal is input Wide Mode: Off INPUT SETTING Video When the RGB signal is input Adjust Signal... Scan Conver ter On INPUT SETTING Input A MENU Items Wide Mode Sets the aspect ratio of the picture. When inputting 16:9 (squeezed) signal from equipment such as a DVD player, set to On. Off: When the picture with ratio 4:3 is input. On: When the picture with ratio 16:9 (squeezed) is input. Note Note that if the projector is used for profit or for public viewing, modifying the original picture by switching to the wide mode may constitute The INPUT SETTING Menu an infringement of the rights of authors or producers, which are legally protected. Adjust Signal... Menu Items Dot Phase Adjusts the dot phase of...
Este manual também é adequado para os modelos :Projetores - VPL-FX52 (1.16 mb)