Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Do not do anything that might damage the mains lead or the mains
During a thunderstorm, do not touch the projector or the cable.
plug.
B Electric shocks can result.
B Do not damage the mains lead, make any modifications to it, place it near
Do not use the projector in a bath or shower.
any hot objects, bend it excessively, twist it, pull it, place heavy objects on
B Fire or electric shocks can result.
top of it or wrap it into a bundle.
Do not place your skin into the light beam while the projector is being
B If the mains lead is used while damaged, electric shocks, short-circuits or
used.
fire may result.
B Strong light is emitted from the projector’s lens. If you place directly into
B Ask an Authorised Service Centre to carry out any repairs to the mains
this light, it can hurt or damage your skin.
Preparation
lead that might be necessary.
Do not place your hands or other objects close to the air outlet port.
Do not handle the mains plug with wet hands.
B Heated air comes out of the air outlet port. Do not place your hands or
B Failure to observe this may result in electric shocks.
face, or objects which cannot withstand heat close to this port [allow at
Insert the mains plug securely into the mains socket.
least 10cm (4”) of space], otherwise burns or damage could result.
B If the plug is not inserted correctly, electric shocks or overheating could
Replacement of the lamp should only be carried out by a qualified
result.
technician.
B Do not use plugs which are damaged or mains sockets which are coming
B The lamp has high internal pressure. If improperly handled, explosion
loose from the wall.
might result.
Do not place the projector on top of surfaces which are unstable.
B The lamp can easily become damaged if struck against hard objects or
B If the projector is placed on top of a surface which is sloped or unstable, it
dropped, and injury or malfunctions may result.
may fall down or tip over, and injury or damage could result.
When replacing the lamp, allow it to cool for at least one hour before
Do not place the projector into water or let it become wet.
handling it.
B Failure to observe this may result in fire or electric shocks.
B The lamp cover gets very hot, and touching it can cause burns.
Do not place the projector on soft materials such as carpets or sponge
Before replacing the lamp, be sure to disconnect the mains plug from
mats.
the mains socket.
B Doing so may cause the projector to overheat, which can cause burns, fire
B Electric shocks or explosions can result if this is not done.
or damage to the projector.
Do not place liquid containers on top of the projector.
Caution
B If water spills onto the projector or gets inside it, fire or electric shocks
Do not cover the air inlet port or the air outlet port.
could result.
B Doing so may cause the projector to overheat, which can cause fire or
B If any water gets inside the projector, contact an Authorised Service
damage to the projector.
Centre.
B Do not place the projector in narrow, badly ventilated places such as
Do not insert any foreign objects into the projector.
closets or bookshelves.
B Do not insert any metal objects or flammable objects into the projector or
B Do not place the projector on cloth or papers, as these materials could be
drop them onto the projector, as doing so can result in fire or electric shocks.
drawn into the air inlet port.
Keep the SD memory card (sold separately) and batteries out of the
Do not set up the projector in humid or dusty places or in places where
reach of infants.
the projector may come into contact with smoke or steam.
BIf the SD memory card and batteries are swallowed, death by suffocation
B Using the projector under such conditions may result in fire or electric
may result. If you believe that the SD memory card and batteries may
shocks.
have been swallowed, seek medical advice immediately.
When disconnecting the mains lead, hold the plug, not the lead.
Do not allow the + and - terminals of the batteries to come into contact
B If the mains lead itself is pulled, the lead will become damaged, and fire,
with metallic objects such as necklaces or hairpins.
short-circuits or serious electric shocks may result.
B Failure to observe this may cause the batteries to leak, overheat, explode
Always disconnect all cables before moving the projector.
or catch fire.
B Moving the projector with cables still attached can damage the cables,
B Store the batteries in a plastic bag and keep them away from metallic
which could cause fire or electric shocks to occur.
objects.
6-ENGLISH
ENGLISH-7
...