Assessments - 5, GPA: 4.4
(
)
)
|
Facilidade de uso
Ash i hara-cho, N i sh i non i ya, Japan 662 Telephone: 0798-65-2111 Telefax: 0798-65-4200 All rights reserved. ; Printed in jipan FIRST EDITION D NOV 1993 DEC. 16, 1997 (TATA) PUB. No. FM-8000 OME-55840 * 0 0 0 8 0 5 8 0 8 0 0 *' 00080580800 A SAFETY INSTRUCTIONS "DANGER", "WARNING" and "CAUTION" notices appear throughout this manual. It is the responsibility of the operator of the equipment to read, understand and follow these notices. If you have any questions regarding these safety instructions, please contact a FURUNO agent or dealer. A DANGER This notice indicates a potentially hazardous situation which, if not avoided, will result in death or serious injury. A WARNING This notice indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. A CAUTION This notice indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury, or property damage. A WARNING Do not open the cover of the equipment. This equipment uses high voltage electricity which can shock,burn,or cause death. Only qualified personnel should work inside the equipment. Do not dissasemble or modify the equipment. Fire, electrical shock or serious injury can result. Immediately turn off the power at the ship's mains switchboard if water or foreign object falls into the equipment or the equipment is emitting smoke or fire. A CAUTION Do not place liquid-filled containers on the top of the equipment. Fire or electrical shock can result if a liquid spills into the equipment. Do not place heater near the equipment. Heat can melt the power cord, which can result in fire or electrical shock. Do not operate the unit with wet hands. Electrical shock can result. Use the correct fuse. Use of the wrong fuse can cause fire or equipment damage. Continued use of the equipment can cause fire, electrical shock or serious injury. WARNING Lable attached A WARNING A To avoid electrical shock, do not remove cover. No user-serviceable parts inside. "A ” A” Name: Warning Lable (1) Type: 86-003-1011-0 Code No. : 100-236-230 ii Introduction Foreword About this manual Features The FM-8000 is a highly advanced, fully synthesized 25 W VHF transceiver, designed to satisfy the stringent requirements of marine communications. DSC operation is available with connection of the FURUNO DSC-8V. This manual mainly consists of two parts (PART 1 and PART 2) and an APPENDIX. PARTI This part provides operating information: basic rules, controls and indications, and operating procedures. PART 2 This part provides information for servicing: self-test, maintenance, troubleshooting, and replacement of fuse. APPENDIX The APPENDIX contains specifications and VHF channel lists. • GMDSS operation with DSC Terminal DSC-8V • Pre-programmed with all international marine channels. Where permitted, USA, weather and private channels are also programmed. • CH16 key provides for immediate selection of channel 16. • Automatic selection of channel 16 when the handset is hung. • Scan function/Dual watch function. • Advanced “voice” detecting type squelch circuit filters out unwanted noise. • Remote station (RB-700) connection available. • Time-out timer limits the continuous transmission to five minutes. Availability of channel modes • Self-test There are three types: Standard, Holland and USA. The table which follows shows the availability of channel modes. Channel mode Type Standard Holland USA INTL available available available USA not available not available available wx not avaialble not available available PRIV not available not available not available PARTI 1. Basic Rules 2. Controls and Indications 3. Operation PART 1 Table of Contents 1. Basic Rules-1-1 1.1 Status at Start Up-1-1 1.2 Key Operation Rules-1-1 Key input*.............................................1-1 SHIFT key............................................1-1 1.3 Automatic Selection of Channel 16-1-1 1.4 Key Response Beep-1-2 One short beep.......................................1-2 Three short beeps....................................1-2 1.5 Remote Control-1-2 “REMOTE” indication..............................1-2 Priority................................................1-2 2. Controls and Indications-2-1 3. Operation-3-1 3.1 Basic Operation-3-1 Turning the power on or off/ adjusting speaker volume...........................3-1 Adjusting squelch....................................3-1 Transmitting/selecting output power..............3-1 Turning the loudspeaker on or off.................3-1 Adjusting dimmer....................................3-1 3.2 Selecting Channel Modes-3-2 Channel mode........................................3-2 Selection..............................................3-2 3.3 Selecting Channels-3-3 Selection..............................................3-3 Channel lists..........................................3-3 PART 1...