Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
L Be sure to connect the power cable to the 2 holes on the left side of the DC terminal. L For details on how to attach the power cable, see page 26. DC terminal AC adaptor Power cord To AC outlet Power cable 123 7 Attach the DC cord to the clamp on the rear of the DC terminal. L This will help to avoid the DC cord to disconnect from the DC terminal. DC terminal Clamp DC cord Introduction and Installation To attach the AC adaptor and the DC terminal to a wall By placing the AC adaptor and the DC terminal in the case and mounting the case to the wall, you can protect the AC adaptor and the DC terminal from tampering and exposure. Note: L Disconnect the DC cord from the clamp on the rear of the DC terminal beforehand. See step 7 on page 23 for details. L Take out the cardboard and wood screws from the AC case beforehand. 1 Attach the rear part of the case to a wall using the wood screws (4 mm x 16 mm). Wall Case 83.5 mm Wood screws 2 Pack the AC adaptor and DC terminal as shown. 1. Pack the AC adaptor in the rear case. LBe sure to run the power cord through the power cord hole. 2. Pack the DC cord in the rear case. LBe sure to bundle the DC cord so that it will not touch the bottom of the case. 3. Pack the DC terminal in the rear case. LBe sure to run the wires through the wire hole, then under the wire rib. Wire rib Wire hole 3 DC terminal 1 AC adaptor 2 DC cord Power cord Power cord hole Introduction and Installation 3 Attach the front of the case. 12 Note: L To open the case again, push the bottom of the front case, then release from the rear case. Introduction and Installation To attach the power cable Monitor station DC terminal Button Button Terminal connector Terminal connector L While pressing on the button with a pointed object such as a screwdriver, insert the power cable into the terminal. L To disconnect the power cable, press on the button while pulling out. L To attach an optional power cable, cut off about 12 mm of the cable cover (1), then push in firmly until the end of the cable is securely inserted into the power connection terminal (2). 12 Power cable cross section Correct Incorrect 12 mm To attach the wires Terminal connector Button L Strip off of the wire cover so that about 9 mm of the wire is exposed. L While pressing on the button with a pointed object such as a screwdriver, insert the wire into the terminal connector. L To disconnect a wire, press on the button while pulling out. Introduction and Installation Using with another machine Door station Monitor station PBX Door (Door Opener) Note: LSee page 15 for wiring information. When connected to a PBX Connecting to a PBX allows you to answer door calls using additional machines. Please use only a Panasonic PBX (page 9). LIf you answer a call from the door station with a PBX extension, the camera image from the door station will be displayed at the monitor station. If the monitor station user tries to answer the call, a beep will sound. The display will turn off when the conversation has ended or when the conversation continued for more than about 3 minutes. LIf you answer a call from the door station with the monitor station, the call will continue to ring at the extension for about 15 to 30 seconds. If the extension user answers the call while the call is still ringing, the door station user, the monitor station user, and the extension user can speak together. L{AUTO} mode (page 32) will not function when a door station call is answered by an extension user. When connected to a door (Door Opener) Connecting to a door allows you to open the door using the monitor station (page 35). Using the Unit Turning {PBX MODE} switch ON/OFF When connecting to a PBX (page 30), turn {PBX MODE} switch on. If not, turn {PBX MODE} switch off. The default setting is {OFF}. 1 Remove the switch cover from the rear of the monitor station. L Use a sharp, thin object such as a mechanical pencil. Switch cover 2 Select {ON} or {OFF} (default). OFF PBX MODE ON {PBX MODE} switch Using the Unit 3 Attach the switch cover to the rear of the monitor station. Switch cover Using the Unit Connecting to a PBX Connecting to a PBX allows you to answer door calls from any telephone. See page 15 for wiring information. Please use only a Panasonic PBX. See page 9 for the PBX model list that is compatible and other optional hardware. Important: L Make sure {PBX MODE} switch is set to {ON} beforehand (page 28). The default setting is {OFF}. L If you connect to a PBX while {PBX MODE} switch is set to {OFF}, voices may be muted for approximately 2 seconds before you can start talking or listening to the caller. OFF PBX MODE ON {PBX MODE} switch Note: L If you answer a call from the door station with a PBX extension, the camera image from the door station will be displayed at the monitor station. If the monitor station user tries to answer the call, a beep will sound. The display will turn off when the conversation has ended or when the conversation continued for more than abo...
Este manual também é adequado para os modelos :Vídeo - VLG201CE (1.36 mb)