Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
A NEW CALL light flashes • Make sure you have reviewed all of the voice mail message(s). If you have reviewed all of the voice mail message(s) and the NEW CALL light remains flashing, your phone may have received a false signal from your voice mail service provider. If you have no new voice mail messages follow the directions in Turn NEW CALL light off on page 25. 6 Appendix Troubleshooting Speakerphone If the other person cannot hear you, make sure the • does not work MUTE light is off. Power Failure is Set the time and date following the directions in Set• flashing the time and date on page 22. —OR— If you subscribe to caller ID service, the time and date will • be reset automatically with the next incoming call. Memory Error This display indicates that a rare memory error has • CID del shown in occurred in the call history. To prevent this error from display interfering with the normal operation of the telephone, all of the call history was removed. Your product should now operate normally; no action is required. 62 Appendix Important product information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information • Read and understand all instructions in the user’s manual. Observe all markings on the product. • Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning. • Do not use a telephone in the vicinity of a gas leak. If you suspect a gas leak, report it immediately, but use a telephone away from the area where gas is leaking. If this product is a cordless model, make sure the base is also away from the area. • Do not use this product near water, or when you are wet. For example, do not use it in a wet basement or shower, or next to a swimming pool, bathtub, kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquids, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly. • Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion. • If this product does not operate normally, read Troubleshooting in this user’s manual. If you cannot solve the problem, or if the product is damaged, refer to the limited warranty. Do not open this product except as may be directed in your user’s manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks. • If this product has user-replaceable batteries, replace batteries only as described in your user’s manual. Do not burn or puncture batteries—they contain caustic chemicals. • If this product has a three-prong (grounding) plug or a polarized plug with one wide prong, it may not fit in non-polarized outlets. Do not defeat the purpose of these plugs. If they do not fit in your outlet, the outlet should be replaced by an electrician. CAUTION: Use only the power adapter provided with this product. To obtain a replacement, visit our website at or call 1 (800) 222–3111. In Canada, dial 1 (866) 288-4268. 63 Appendix Important product information Especially about corded telephones • Electrical power: The telephone base must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made from the handset if the telephone base is unplugged or switched off, or if the electrical power is interrupted. • Power adapter: The power adapter is intended to be correctly oriented in a vertical or floor mount position. SAVE THESE INSTRUCTIONS 64 Appendix FCC and ACTA information If this equipment was approved for connection to the telephone network prior to July 23, 200 , it complies with Part 68 of the Federal Communications Commission (FCC) rules. If the equipment was approved after that date, it complies with the Part 68 rules and with Technical Requirements for Connection of Equipment to the Telephone Network adopted by the Administrative Council for Terminal Attachments (ACTA). We are required to provide you with the following information. 1. Product identifier and REN information The label on the back or bottom of this equipment contains, among other things, an identifier indicating product approval and the Ringer Equivalence Number (REN). This information must be provided to your local telephone company upon request. For equipment approved prior to July 23, 200 , the product identifier is preceded by the phrase “FCC Reg No.” and the REN is listed separately. For equipment approved after that date, the product identifier is preceded by “US” and a colon (:), and the REN is encoded in the product identifier without a decimal point as the sixth and seventh characters following the colon. For example, the product...